|
|
Browsing this Thread:
1 Anonymous Users
|
|
B210, begging for KA24E |
|
|
Just popping in
Joined: 2008/1/17 5:19
From santa barbara california
Group:
Registered Users
|
I have a 1980 B210 four door. I also have a Z24 and a KA24E, trans from a 1985 720, two solex side draughts, plus many misc. brackets from the 720, 240 SX and my 210. It is mechanically stock now with the A14 and five speed. I need some defintive awnsers on the motor swap. Which motors mounts to use, and what to do about the crossmember/steering/oil pan. Do I cut up the oil pan, or cut up the crossmember? one of them has to move! I'm not scared of cutting it up (sawzall is my favorite tool). 
Posted on: 2008/1/17 5:49
|
|
|
|
|
Re: B210, begging for KA24E |
|
No life (a.k.a. DattoMaster) 
Joined: 2003/12/3 0:49
From Burbank, CA
Group:
Registered Users
|
I think the KA24 fits better.
Z24 is too long to do easily... as i remember.
Check the wiki, all the engine swaps are discussed a bit.
better get some 280zx struts for a conversion too, that's gonna be heavy for stock front end, and way too much power for the stock brakes.
Posted on: 2008/1/17 5:58
|
|
_________________
|||\ 81 KPB310 /|||
|
|
|
Re: B210, begging for KA24E |
|
|
Just popping in
Joined: 2008/1/17 5:19
From santa barbara california
Group:
Registered Users
|
I am actually using the Z24 bottom end with the KA head. Same basic engines. But I have searched all of the wiki swaps and still have some questions. I am wondering if there is a front sump pan for the Z24. Even a mid sump would help. Anyone know?
Posted on: 2008/1/17 6:02
|
|
|
|
|
Re: B210, begging for KA24E |
|
Home away from home 
Joined: 2005/1/22 11:45
From Springwood NSW, Formerly Tas.
Group:
Registered Users
|
ok no help here but i think its funny how in other parts of the world, most people would love to have an a14 and 5spd in their 120y, i know i would.. good luck with it anyway
Posted on: 2008/1/17 6:19
|
|
_________________
1978 120y Coupe.
|
|
|
Re: B210, begging for KA24E |
|
No life (a.k.a. DattoMaster) 
Joined: 2002/7/19 12:41
From sydney australia
Group:
Registered Users
|
the Z18 had a front sump, so maybe thats the go - or a Z-NAPS, whatever one of those was, which i assume would have been a Z20. I would be using the KA24E, as it's a more refined engine, but i would be looking to add a T (turbo charge it) to that designation, just for that extra monster factor.
Posted on: 2008/1/25 3:38
|
|
_________________
Would it be possible to get a late model Nissan Micra, fit the 1.8 litre motor from a Tiida & then turbocharged it? Your answer must include parts numbers for the conversion. You have 12 months. Commence.
|
|
|
Re: B210, begging for KA24E |
|
Home away from home 
Joined: 2000/5/17 6:55
From Los Angeles,CA. USA
Group:
Registered Users
|
SO do you have a connection for SMOGs or is vehicle going to be off road use only??
Posted on: 2008/1/25 4:49
|
|
|
|
|
Re: B210, begging for KA24E |
|
Home away from home 
Joined: 2005/10/16 7:33
From bend oregon
Group:
Registered Users
|
isnt it exempt because of the cars age? be over 30 years of age.
Posted on: 2008/1/25 4:58
|
|
|
|
|
Re: B210, begging for KA24E |
|
Home away from home 
Joined: 2006/10/6 1:21
From Midway City, California
Group:
Registered Users
|
not anymore, now its mandatory 1975 and older
Posted on: 2008/1/25 5:12
|
|
_________________
if it was easy to restore, they would call it chevrolet
don't piss off America, or we will bring democracy to your country
|
|
|
Re: B210, begging for KA24E |
|
No life (a.k.a. DattoMaster) 
Joined: 2003/12/3 0:49
From Burbank, CA
Group:
Registered Users
|
there are other ways to deal with that ;)
basically if it came with any emissions equipment it has to stay at that level or better... However CA is somewhat inflexible re: better. You'll be arguing with the smog referee for a long time trying.
Truly, in CA you can't even change transmissions without it being emissions tampering.
Hey Leo long time no see!
Posted on: 2008/1/25 5:42
|
|
_________________
|||\ 81 KPB310 /|||
|
|
|
Re: B210, begging for KA24E |
|
|
Just popping in
Joined: 2008/1/17 5:19
From santa barbara california
Group:
Registered Users
|
The motor is going to be capable of running methanol by changing the jets and the fuel alone. It will have a catalytic converter so the cops can't say ####. There are many ways around smogs, legally. We just have to be smart about it. My motor will pass a smog, even with twin 40mm solex's. These cars could be optiond with twin SU's, so whats the difference with running solex's? And the block of the motor is a Z24, so the numbers say it was origanally a carburated engine. It's the visual inspections that #### most car enthusiasts. Make them look factory!!!
Posted on: 2008/1/26 20:36
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|