Howdy folks,

I bought a Jaycar high energy ignition kits to put into the datto a little while ago. I assembled it but have only just got around to mounting it today.

Has anyone had experience in the past with these? I only ask because mine isn't working at the moment.

There are 4 wires involved with the standard points installation (earth, +12v, - coil and 'from points') and I'm positive that I've just got them or even one of them going to the wrong thing.

I wired the earth (easy and it has been proven to work as I had something else working there before)
I had the 12v supply going to the +Coil (not sure that this was the best idea but i chose it because there was current going to it when I turned the key to 'on'.
One of the other wires I put to the -Coil (in the instructions this was pretty specific)

The part I don't understand is where the 'from points' wire is supposed to go.

Has anyone installed one of these and had it working? Where should I be putting the 'from points' wire and should I be taking any other wires out to put these in their place instead?

I hope that made sense, it's late. But thanks in advance guys.