Hey all,

As my ute is perfect and I cant have another project these parts have to go...

------------------------------------------------------------------------------------------------------------------------

The a14 was out of my old ute. The car was rolled onto its side after a 4WD cut me off about 2 years ago (unfortunately it was the case of risk killing the ute or have a 30 odd inch 4WD tire on my lap at 60kmh). I drove it for about 2km's after that and then on the back of a truck, hasnt been started since. The engine has only done about 5000km since it was rebuilt (the owner prior to me) but has been sitting in the ute for about 2 years. It never missed a beat when it was in the ute, I will be sad to see it go. It comes with a set of 4-1 extractors, 56A 4-speed and other bits in the pic, it was all together just had to pull it apart to fit in the corolla. Not sure what its worth but I would hope to get at least $500












------------------------------------------------------------------------------------------------------------------------

The webbers were bought on ebay by me about 2.5 years ago, cost me $600. They were to go on the engine above. They are 45mm DCOE on a new redline manifold. The numbers are consecutive (8N & 9N). One has a small crack in the outside shown in the photos but it does not appear to effect anything internally that I can see. Open to reasonable offers.














------------------------------------------------------------------------------------------------------------------------

Would prefer buyer pics up, if that is not possible then buyer arranges for freight to pickup at my place. If your local and want the engine then I am willing to transport it in my Corolla (for case of becks) if you dont have a way to pick it up.

All parts come as they are and inspections are welcome outside of business hours.

PM me for contact.

Cheers...