i'm hunting for some new panels for my datsun i need them all quarters and sills to.
any help would be great

Keep an eye out on Ebay, brand new ones pop up relativly often.

Was speaking to the panelbeater that is doing my ute...
He said that if using Taiwanese panels it's easier to replace them all with after market stuff.
In other words, when you mix and match. It get's harder to align and fit origional with aftermarket.

Everyone has a different opinion with aftermarket panels... some people have been stung and some have had good experiences.

TRY to find genuine stuff otherwise ebay seller - 'jkratso' has heaps of stuff.

try wetherill park panels, 12 nello pl, sydney nsw, aftermarket stuff 02 9756 3011

Wetherill Park panels is the way to go, the bloke on eBay sources his panels from them, so his are obviously more expensive. I bought all my panels from them, and they were anywhere from $10-$40 cheaper depending on the panel.

me to, example rear 1/4's $110 ea, same thing in ebay, but lots cheaper ($220-245 ebay)

Bugger... I Should have done some shopping around or at least asked on here!

i got all my panels from ebay, but make sure u get a good panel beater coz there not the best, sum panels were nice fit andsum needed lots of work

thanks guys all help is appreciated i'll get onto the mob from sydney.
i'm a spray painter and have had much experiance with after market parts and i haven't seen many good ones but they are out there, they dont always do the vehicles you want as i have found out, 90% of all aftermarket parts dont fit properly and require modification and are hardly ever straight, when doing up all cars new parts are always better then repair unless the repair is very small and it'll work out a hell of alot cheaper.