hmm lol sorry man thanks for the idea but it worked on another car cause i was diagnoisin a problem wid it n used mine so its in good workin order lol keep the ideas comin please might be something i missed!!

check the ignitor box as well could be stuffed, i had the same problem n my ignitor box wasnt earthed properly

check the ignitor box as well could be stuffed, i had the same problem n my ignitor box wasnt earthed properly

yer thanks man!! all wiring is correct! all earths are attached!! followed all my wiring diagrams n wired all up! just the triggerin side of things isnt working!

you haven't given heaps of info so this is all I've got
- Is there power to the ecu while cranking? I've seen people accidently power the ecu with the accessories power so it loses power when you are cranking.

-Are your relays ticking over when you power up the ecu?

-All earth wires connected? There are 2 that come out of the engine loom and attach to the top of the inlet manifold that are important, Also is the engine earthed properly?

good luck

full ova it guys, no injector pulse, no spark!! done my own wiring triple checked it all got my boss to triple check it all wiring is good! just wonderin if i can get a shine of light by anyone who has done there own wiring n the ca18det has or hasnt got injector pulse n found ways to fit it!! was thinkin of just rippin the wiring out n puttin a micro tech in it!! n yes the crank angle sensor is workin, if tested it n swapped it.. n there is power to the injectors just no pulse please help with some ideas guys..