User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





rob1200
will a15 head fit a12
#1
Not too shy to talk
Joined:
2009/8/5 9:10
Group:
Registered Users
Posts: 27
Offline
i have a a15 head ( i think not to sure)
will it fit my 1200 ????

Posted on: 2009/9/4 9:26
Transfer the post to other applications Transfer


ROConnor
Re: will a15 head fit a12
#2
No life (a.k.a. DattoMaster)
Joined:
2008/2/17 3:04
From Melbourne, Oz
Group:
Registered Users
Posts: 2029
Offline
yes

edit: will need an a15 intake manifold

Posted on: 2009/9/4 9:33
_________________
"I hav achieved wood"

"choice from chris, drive harder than your mum... word."
Transfer the post to other applications Transfer


Dundee1000
Re: will a15 head fit a12
#3
No life (a.k.a. DattoMaster)
Joined:
2003/2/10 5:17
From Freo
Group:
Registered Users
Posts: 3318
Offline
depending on age, oil feed to rockers may need modding, depends dissy at the front or in the middle..

Posted on: 2009/9/4 12:23
_________________
'68 Thou Wagon,(home now) up and running
'69 2 door project, the yellow thing,
A12A Project motor, for the yellow thing.
A15 PSI Project Motor
'72 CB750k,
Transfer the post to other applications Transfer


rob1200
Re: will a15 head fit a12
#4
Not too shy to talk
Joined:
2009/8/5 9:10
Group:
Registered Users
Posts: 27
Offline
i have a intake manifold to suit twin webers but i will be puttin carby of a motor bike.
im not sure what the head is off but it all looks the same as the 1200..... the motor the head came off was out of a datsun cherry

Posted on: 2009/9/4 12:36
Transfer the post to other applications Transfer


ROConnor
Re: will a15 head fit a12
#5
No life (a.k.a. DattoMaster)
Joined:
2008/2/17 3:04
From Melbourne, Oz
Group:
Registered Users
Posts: 2029
Offline
sure it's not a GX or a12t head, you might be in luck!?

new head on old block has no oiling prolems, but vice versa ya need to drill a new hole!

Posted on: 2009/9/10 12:18
_________________
"I hav achieved wood"

"choice from chris, drive harder than your mum... word."
Transfer the post to other applications Transfer


junior
Re: will a15 head fit a12
#6
Home away from home
Joined:
2006/4/26 1:48
From Delaware, USA
Group:
Registered Users
Posts: 195
Offline
Might have to do what I did with mine, put the A12 gasket on the A15 head and mark the oil hole that feeds to your rockers and then drill a 45 angle hole from the bottom of the head towards the hole where the head bolt goes threw. I did this swap to mine and didn't have lubrication to my rockers until I noticed that the A12 doesn't lubricate the rockers like the A13,A14 & A15 does. I drilled the hole and it took care the problem for me. Good Luck.

Posted on: 2009/9/10 16:15
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]