Awsome thanks a'lot fellas, pretty much cover it all there!

It is the same tailshaft, same Nissan part number (we got both autos and 63a gearboxes here).

For a clutch disc, try Nissan:
* 30100-K0500 ASSY-DISC,CLUTCH 63A 5-SPEED(COUPE) B210 USA, JDM $66.07 USD
* superceded 30100-H5801

The pressure plate is:
* 30210-N1600 ASSY-COVER,CLUTCH 63A 5-SPEED(COUPE) B210

63A 5 speed has the same splines as a 3N71B (3 speed auto) 120Y

so grab a H145, H150 or BW 120Y auto tailshaft - might need to be shortened though!

any clutch joint will be able to make the plate you need, its just an l series centre with 180mm(from memory) outer diametre. l series standard diameter - 200mm, a series - 180mm.
I bought one a few years ago, the Australian part# is NSD030U and is made by DAIKIN
It was a made to order thing so I dont know if they can still supply them
its OD 180mm
ID 125mm
SP 24
MD 25.6mm


the tailshaft front spline is also the same as 160/80/200b. get a shaft from the wreckers and put the diff end on it.

ask lagwagon, hes using a series clutch on l series 5 speed, might be similar info

Its a 63a for a series. even biger then 60series.


Hey DD We never got them Here, so may be a problem. Did the 63A come in any vans??

Might get an l16 clutch and Redowl the flywheel, want to put a a12 flywheel in anyhow.

i thought he was? might be wetdriftwarrior.... im confuselded too.

63a transmission take an L-series clutch spline.
Just get a B210 5-speed disc.

63a length is same as automatic, different from 56 gearbox.

hes going L? maybe I should read the whole thread before I say somthing else stupid!

hes going l so 63 would be about right.
L16 or l18, depends which clutch, one bigger than the other. small clucth l16 should do. i got a fly here some where if you need one?