thought id better start a new thread , as my old one got a bit haphazard, and a bit has changed with the ute since then.

update..


STANDARD A12 AND 4 SPEED.

200B FRONT STRUTS, DISCS AND CALIPERS.STANZA BRAKE HOSES. PROFESSIONALLY SHORTENED 60MM WITH BRAND NEW CAMRY SHOCKERS. BRAND NEW BRAKE PADS.

120Y FRONT SWAYBAR AND BRAND NEW BUSHES.

BRAND NEW BALLJOINTS, TIERODS.

NEW BUSHES IN CONTROL ARMS.

REAR SPRINGS PROFESSIONALLY RESET 3 INCHES LOWER. NEW BUSHES THROUGHOUT.

STAINLESS STEEL EXHAUST AND MUFFLER.SOUNDS VERY TOUGH.

FLARES HAVE BEEN FITTED PROPERLY BY CUTTING GUARDS TO ACCOMMODATE LARGE TYRES.

COBRA CLASSIC DRIVER AND PASSENGER SEATS. ONLY HAVE 5000KM USE.PRACTICALLY BRAND NEW.

HAS SPORTS STEERING WHEEL.

SEMI SEALED H3 HEADLIGHT UPGRADE, MUCH BRIGHTER AND CAN CHANGE GLOBES.

SIMMONS B45 15 INCH WHEELS. THEY ARE 7.5INCH WIDE FRONTS AND APPROXIMATLY 8-8.5INCH ON THE REAR.

TYRES ARE PRETTY GOOD ON THE FRONT 185/60 AND REAR 225/50

THE INTERIOR HAS BEEN STRIPPED BARE AND LINED WITH DYNAMAT SOUND DEADENER, ON THE FLOOR FRONT AND REAR FIREWALL AND IN THE ROOF. HAS ADDITIONAL LAYER OF 1.5INCH THICK FOAM DEADENER UNDERLAY WITH BRAND NEW CARPETS OVER THE TOP AND A BRAND NEW HEADLINER.HAS FIBERGLASS DOOR TRIMS(NOT COVERED) AND A FIBERGLASS COUPE CONSOLE.

HAS THE OLD SQUARE TYPE DASH. WITH SMALL TACHO INSTALLED.

BRAND NEW TAILIGHT LENSES.

HAS JDM FENDER MIRRORS MOUNTED.

CUSTOM TONNEAU COVER.

THE PAINT IS ONLY 2 YEARS OLD, AND ONLY SEEN ABOUT 1000KM OF DRIVING AND NEVER BEEN IN THE RAIN. PAINTJOB WAS DONE IN A GARAGE, AND IS NOT A PRO JOB, ALTHOUGH LOOKS PRETTY GOOD. HAS A COUPLE OF VERY SMALL IMPERFECTIONS ABOUT THE SIZ3E OF A MATCHHEAD, BUT OVERALL THE UTE IS PRETTY MUCH FREE OF RUST. IT WAS ALL CUT OUT AND REPLACED WITH METAL, NOT JUST BOGGED UP.

THE EXTERIOR ALSO HAS CUSTOM 'UTE GX' STICKERS ON THE SIDE AND A CUSTOM 'GX' BADGE ON THE REAR.



UTE DOES NOT CURRENTLY HAVE A GRILLE, BUT I WILL HAVE A BRAND NEW ONE SHIPPED TO THE BUYER AT MY EXPENSE UPON SALE.

THINGS IT NEEDS:

GRILLE( AS PREVIOUSLY MENTIONED)

GLOVEBOX OR GLOVEBOX LID

TAILSHAFT

HEADLIGHT & WIPER SWITCHES

A MINIMAL BIT OF IGNITION WIRING

BONNET IS STILL IN PRIMER- WILL GET IT PAINTED IN THE INTENDED BLACK BEFORE SALE.

I WILL FIX UP THESE THINGS IF I CAN FIND THEM OR THE TIME BEFORE SALE, OR AT THE VERY LEAST HELP WITH THE SOURCING OF PARTS.

THE UTE IS JUST OUT OF QLD REGO, AND HAS BEEN MOD PLATED FOR THE SEAT CONVERSION IN QLD.

FOR THE COST OF REGO, I CAN PROBABLY RE REGISTER IT FOR A QLD BUYER IN THE NEXT WEEK OR 2, BUT DOES NOT COME WITH THE PLATES IN THE PICS.

PERFECT FOR A CA18DET CONVERSION.

PRICE $5000

CALL ANYTIME ON 0428 887467 AND ILL ANSWER ANY QUESTIONS.

CAR IS LOCATED IN TAMWORTH,NSW CAN ORGANISE DELIVERY LOCALLY OR WITHIN 2 OR 300 KM.

pics

[img]http://i.ebayimg.com/15/!BecN,-w!2k~$(KGrHqEOKkEEryOirg9-BK9SiVoqEw~~_12.JPG[/img]
[img]http://i.ebayimg.com/17/!BecNcG!BGk~$(KGrHqIOKjgEr)6M9d80BK9Si,LWnQ~~_12.JPG[/img]
[img]http://i.ebayimg.com/17/!BecNeWQB2k~$(KGrHqMOKiUErzGbPL,QBK9SijqcoQ~~_12.JPG[/img]
[img]http://i.ebayimg.com/04/!BecPe+w!Wk~$(KGrHqEOKicEry!vFYmMBK9S3o(cSQ~~_12.JPG[/img]
[img]http://i.ebayimg.com/18/!BecPfZQ!mk~$(KGrHqUOKiMErzIvY1JlBK9S3smY-!~~_12.JPG[/img]
[img]http://i.ebayimg.com/13/!BecPg!QB2k~$(KGrHqIOKiwEryYkgvmZBK9S3zCUNQ~~_12.JPG[/img]



cant get em to work, little help please!!

what am i doing wrong here?

I cant believe it hasn't been sold already, how could you build up something like this for less than the purchase price?

i know levey, musnt be much money around these days.

here is a link to the pics i cant get them to work!!!

ute pictures.

bump

bump

WTF, this Has been up for sale for a while, if only it was in wa ;)

yerp,
it also comes with a set of et pulsar rims in very good condition.