extra yellow power originally from Japan
but American tinkering for more muscle.

New motor bolted to the Powerglide.
I spent a little time yesterday sanding the letters on the valve cover. Used a sanding block and started with 80 grit and worked my way up to 1500 wet sanding at 800 and up. Looks much better now.
I'll put everything else in today. If I have time, I'll fire it up. May run a few passes before swapping the 430 gears with the 411 just to get an idea on the new motors performance.
Race season. Is just around the corner. 👍

Attach file:

---

  20200313_163551_copy_1008x477.jpg (176.03 KB)


  20200313_163437_copy_1008x477.jpg (152.87 KB)


  20200313_163410_copy_400x843.jpg (162.88 KB)


  20200313_164407_copy_400x845.jpg (150.57 KB)


  20200313_122501_copy_400x845.jpg (155.34 KB)

Motor ready to go in.
New Look!!!
Had to wait a week for Chris to powder coat the valve cover.
Not going to make the first race next week but no big deal. Season opener is just one crazy day. 🙂

Attach file:

---

  20200312_152547_copy_400x845.jpg (188.84 KB)


  20200312_152604_copy_400x845.jpg (187.73 KB)


  20200312_152714_copy_400x843.jpg (187.76 KB)


  20200312_152637_copy_1008x477.jpg (170.78 KB)

Although by now the motor would be in and running but since the season does not start for another month, I've been off doing other things. I manage to put the head on, set the timing and install the timing covers today. I'll be back at it next week. I have to work this weekend.

Attach file:

---

  20200227_135727_copy_410x866.jpg (193.44 KB)

Oldskool Red :) will be a nice contrast
but either way that KA is infernal

Parts have been back from the balance shop for about a week but I've been busy working on jetskis and Snowmobiles. 🙂
Better get back to the car. I painted the block black again. I debated yellow. If anyone thinks I should paint it yellow, put in your 2 cents. Crower Stage 3 came and valve just waiting to be installed. 👍

Attach file:

---

  20200222_181117_copy_1152x546.jpg (178.73 KB)

It's all about Old School Technology.

faster than the 510 datto by 0.07 seconds!!
also you beat the Honda which surprisingly
had a good start but you had higher trap speed?!

Some lexus/Crowns/mk2 had 1zj-fe which some prefer due
to very revvy natures can hit 10k rpm with right internals.

I know today the 2jz is king of the imports but the vg30 is
a very underrated engine that can match the Jz series.
From factory the vg30 is re-known for 800hp stock internals

for NA the now getting old VQ V6 owned by Sascha Anis built by JWT
makes 537 hp 8200rpm / 410 lb-ft most powerful NA VQ in the world.
Designed for road racing has usable 350 lb-ft at just 3,500 rpm.
https://www.enginelabs.com/engine-tech ... an-vq-series-engine-ever/

At the end of the day, carb fed supercharged KA2.4L is so crazy for
its an analog route many will not tinker with in favor of high tech ecus.

So my coworker was mentioning about how his daughter took up drifting. He mention it was a 6 cylinder Lexus she was driving. I was guessing a 2JZ motor so I brought this link to show him what that motor is capable of doing.

Import Face Off Pacific 2019

The first race is a GTR.
Second race is the 240z with the 2JZ motor.
Third race I was surprised when my car came up. I pulled it off at the end.
Last race is a 510 with a turbo KA24E.

So here's another picture of my rear oil port for the KA24DE block. It will allow oil to flow evenly throughout the block. This should avoid any attempts for another #4 rid bearing to spin.
Still waiting for my parts from the Balance Shop. A full engine Balance should get me some smooth high RPM's. 🙂

Attach file:

---

  20200208_115614_copy_1008x477.jpg (181.89 KB)