I was going to use mens colours but they all had been snapped up by guys with insecurity issues!

All that red tubing reminds me when my guts where put on the
table beside me during my appendix removal when I woke up midway :)

Literally looks like you spilled your guts on this one.

Ha Ha, It is a bit loud.

If you squint a bit it looks black tho.......


No, squint tighter!!


See, Black!

if will cost you $100 to have a guess but i will spend it wisely for you.

such a pretty contraption simon, now do they come in mens colors? pink and green, did you raid the kids paint box? lol

A pic showing the altenator mounts and the ceramic paint on the manifold, I dont think the paint will last too long!

The altenator is a 90amp unit from a VS Commodore, Easy to find a replacement if it dies too.

I brazed 4 bits of flat steel to the crank pully to use for the ECU speed referance. Its a bit agricultural but it should work ok. Ive made a little ally bock that will hold the sensor. It will be welded to the timing case between the blt so i can change the belt easily still.
I still have to finish the sump and modify the distributor for the sync signal.

Can i have a guess of the HP too?

wow but your thermostat housing looks like it has rattled loose, or did lags take the bolts for his 1k? ;)

Ive been a bit busy lately so this engine is still not going. Im back on it now and shouldn`t be too much longer.

Here is a pic to show progress.

Gibson motorsport Exa
330 horsepower (246kw),
front wheel drive and a locked diff
750kg

The question is: How did they get that kind of power from a 1.5 litre four? Oddly enough, from a typographical error. When the homologation papers came out, someone had inadvertently hit the '3' key instead of the '2' in a fortuitous part. Homolgated turbo size now read 'T03' instead of 'T02'. Fred and the team went "you beauty" and a T03 was fitted. Now 1.5 litres and an old school T03, as anyone would guess, add up to a pretty savage power delivery. This thing would literally change lanes at the merest sniff of boost, and it runs a fair bit of boost too - 23psi (1.6bar ) to be exact. :))

I wonder if anyone knows who bought the speedway e15 and a series hybrid?

Darn if only nissan made that little thing RWD!!!

thanks simon, i dont want the money- just want you to finish it and we can all see how much power it makes, especially on your dyno ;)

Im not sure i want a photo of you holding it mik. You realy should take that one yourself! i`ll take a photo of the $100 tho ;)