|
Browsing this Thread:
1 Anonymous Users
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2008/3/30 3:28
From Albany, Perth Australia
Group:
Registered Users
|
what does number 3 look like?? especially the valves
Posted on: 2011/4/15 13:30
|
_________________
1200 Smerf Mobile
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
Havnt checked the head but ill have a look in the morning
When I did a wet comp test it came up from 110psi to 175psi
So that inducatea rings to me
Posted on: 2011/4/15 13:57
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
Ok so darren checked the head out for me ,and it appears to have had a port job
Also found out my crank is ok and nothing to worry about so thats a relief !
Got my awesome bike carbs the other day ,cheers jarryd ! ,i bought chrome tail light trims early last week and they were suposedly posted early last week but I havnt got them yet
How long does it normaly take for small stuff by road?
Ok so I found out that I can use GA16 pistons ,they give 7cc of dish and to fit I only need to get the LE of my rods honed cos the ga uses a floating pin
Apart from that the deck might need to be shaved 20thou
With the 7cc pistons and my 60thou shaved head I will get 10.29:1 Comp
If the pistons were 6cc it would come up to 10.5:1 which is perfect :D
Also got some pics of the bike carbs and my solexs that I mighr put up
Posted on: 2011/4/18 11:20
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
Home away from home
Joined: 2009/3/17 12:28
From Brisbane
Group:
Registered Users
|
thats alright mate,
good luck with the build
Posted on: 2011/4/18 11:59
|
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
Cheers jarryd
Did I have tjem running on a motor and what bike are they off ?
Posted on: 2011/4/18 13:20
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
ok great news
i can use the GA16DE pistons ,no probs
ok to get them to work i need to
get block cored to 40thou (optional) get LE of rod honed abit to fit the GA gudgen pin dummy build the motor ,and check i dont need valve reliefs with the cam i want (its freakin huge) deck block 20thou ,to make pistons sit flush with the deck at tdc
also found out the dish on them is 7cc and means i will get 10.29:1 comp ,but ide like to bump it up a little .so ill be using a gx head gasket (or just a thin steel gasket) to give me a slight bit more comp
i was also thinking today
would it be possible to ofset grind the crank 20thou to bring the pistons up and then i wont have to deck the block and i will get a little more cubes aswell as keeping the comp up
is this doable or even worth it ? with 40thou over bore how many cc more would i get ?
tying to get the most cubes i can !
cheers
Posted on: 2011/4/19 16:20
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
Weell I got my new tail light trims today and they arnt for a 1200 ,pretty sure thay are for a holden gggrrr
Posted on: 2011/4/20 5:16
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
Update !
Block has been dipped and crack tested
Crank ground Pistons ,bearings rings and gaskets bought Block is getting bored today
Soo im pretty broke atm haha
Posted on: 2011/5/5 2:26
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
News update
Cam is getting done once mike drops a stock cam off to southsides
Its going to be 446 thou lift with the same duration and stuff as the ivan tighe ,neil at SSsaid its a massive cam for an a15 but it is designed to work with twins
Also ,when I get my block home ill buy some paint to do my bonnet and fix my tail gate too ,might bog the door up and use it ,then paint a few bits around the car
Ive got my new sills but noone to fit em so ill probly leave them until I get the money to take it to a panel shop
Unless anyone who is confident they can do a good job is willing to do it for cash?
Posted on: 2011/5/12 4:21
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
Re: Estyres 1200 ute build thread V1.0 |
|
No life (a.k.a. DattoMaster)
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
News update
Cam is getting done once mike drops a stock cam off to southsides
Its going to be 446 thou lift with the same duration and stuff as the ivan tighe ,neil at SSsaid its a massive cam for an a15 but it is designed to work with twins
Also ,when I get my block home ill buy some paint to do my bonnet and fix my tail gate too ,might bog the door up and use it ,then paint a few bits around the car
Ive got my new sills but noone to fit em so ill probly leave them until I get the money to take it to a panel shop
Unless anyone who is confident they can do a good job is willing to do it for cash?
Posted on: 2011/5/12 4:21
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|