Been working on this project off and on, motor and trans all mounted up. still have to finish the trans tunnel. got the gas pedal done and the accelerator cable. water outlet has been modified so has the new radiator, alum pulleys, water lines modified, steering column is done, and the rack n pinion is almost done.

Finally got some new pics to upload

Attach file:

---

  80'210 0011.JPG (94.33 KB)


  80'210 0021.JPG (110.95 KB)


  80'210 0041.JPG (127.07 KB)


  80'210 0031.JPG (97.06 KB)

Release the Beast! Sweet motor. I want to see more.

Thanx Ernie, just finished up the alternator

Is that a B210 tunnel, or a 1200 automatic tunnel? How's it fit the SR20?

That is my 80 210 tunnel that is cut out, with the sr20 trans in it.

nice work ,what rack are you using and what mods to get it in ??

keep the updates comin

Alternator all painted up and installed, thermostat housing too. Thanx Estyre, the rack is out of a 240sx, had removed the steering column and and modified the end to make it splined instead of having the rag joint, using two steering u-joints out of the 240sx and the slip shaft, at first i will run without power steering to see if it is needed. added the stock rack brackets onto the crossmember. bought some poly bushings for it, I will be running the 240sx front suspension.

Attach file:

---

  80'210 0421.JPG (134.23 KB)


  80'210 0431.JPG (119.36 KB)

Nice work!!
My motor is ready to go back in as well. I'm looking at redoing my SC plumbing.

Thanx Ernie, I should be getting back the radiator, water lines and my intake before the weekend, so hopefully will get to work on it some more. After that i should be able to finish up the steering rack.