Had the steering link shortened today and installed, the rack works nice and smooth. Installed the turbo and exhaust mainfold. Heat sheild is on too.

Attach file:

---

  210 007a.JPG (82.48 KB)


  210 006a.JPG (115.43 KB)


  210 008a.JPG (112.21 KB)

Like the rocker cover mod, in your opinion, whats best way to do it. I reckon it makes the motor look like a lotus twin cam

I tried getting acouple of different machine shops to do it, but they all said no. so I just used a grinder and a sander. still got some more fine sanding to do then it's off to powdercoat. and Thanx for the compliment.

Attach file:

---

  210 011a.JPG (118.51 KB)

thanks silvia-specr ,what are the main advantages to rack and pinion and could i run it without power steering ?

did you need to shoren the rack ? and can you please explain how you are putting the 240sx front end in ? what mods ? and what components are you using

thanks :) nice work ,those dress up bolts look shmicko!!!

i am running mine with no power. mostly just trial and error, right now i will most likely end up with some bumpsteer. will work out the kinks in the system later. Thanx, here is a way i found after i had done mine. after i cut off the treaded tudes for the lines i just inserted grease fittings and filled with grease. here's a link http://www.nicoclub.com/archives/howtoo-steeringrack.html
hope this helps

Been working on more of the front suspension, got the arms cleaned up and painted, also cleaned up the valve cover the rest of the way. and got it painted. A couple of pics also with the new center plug cover.

Attach file:

---

  210 018a.JPG (122.85 KB)


  210 019a.JPG (135.20 KB)


  210 020a.JPG (134.15 KB)


  210 021a.JPG (126.07 KB)

Attention to details I see! Looks great!

i m going on with the same modification over the 210 - which cross member did you use???? and what r u doing on suspentions i mean both rear and front


this is a the silvia cross member & rack and pinion

Front suspension will be s13, coilovers, brakes and arms. the rear, i just picked up a complete rear fron a 80 200sx, should bolt right in, but it is only a h165, i have an h190 but i need all the mounting transfered over. The crossmember is a combo between s13 and b310. yours looks way cleaner than mine does.

almost forgot the new pics, new engine pic, part of the front suspension in, a maxima rear spoiler fit really nicely, and the tens on the rear (just needed to put them somewhere for now)

Attach file:

---

  210 022a.JPG (128.20 KB)


  210 023a.JPG (82.68 KB)


  210 024a.JPG (94.72 KB)


  210 025a.JPG (97.51 KB)