Release the Beast! Sweet motor. I want to see more.

Finally got some new pics to upload

Attach file:

---

  80'210 0011.JPG (94.33 KB)


  80'210 0021.JPG (110.95 KB)


  80'210 0041.JPG (127.07 KB)


  80'210 0031.JPG (97.06 KB)

Been working on this project off and on, motor and trans all mounted up. still have to finish the trans tunnel. got the gas pedal done and the accelerator cable. water outlet has been modified so has the new radiator, alum pulleys, water lines modified, steering column is done, and the rack n pinion is almost done.

Well I got to do some work on the 210 today, i finally finished the front crossmember. was messing around with the transmission mount, removed the sr one and installed the factory 210 mount and it lines up with the mounting holes, now i just have to cut out for the shifter. So the motor and trans are now sitting in the car on their own, Yea!!

Quote:

I have the 15x6 steelies as well, with hub caps of course! In the future I may get some 3 piece wheels or some bling for club/show days. Won't be on all the time though.
I'll have to check the diff, but centre tyre-tyre is about 1295mm. In hindsight I should have had it made 10-15mm wider each side to fill guards, and give the calipers a little extra clearance on the inside. Tyres are 205/50/15.

i don't know, sleepy or green leaf, as you so call them

oh oh oh I know run the hubcaps =D Maybe we'll get some work done on this bad thang tomorrow I hope lol

Carl, what size wheels did you end up running? and also your diff width (outside dimensions) if you have them. I got some 14" weld wheels but i also got given to me yesturday a set of 15 x 6 nissan steel wheels with the hub caps. what to run

Nice work, looks like a pretty clean shell from the pics. Sticking with the sleeper look :)
Glad I could help with motivation, seeing other people get things on the road makes you want to push things along. I know I did.
Good luck with the build, plenty of fun to be had in the Sunny/310 that's for sure.

I will try to get the first pics posted up on here