BUMP>

Weber adapter plate is back up for sale.

Not too sure yet D.

Last bump for webers, going on eBay now.

Chokes: 30mm
Primary Jets/Pump Nozzles: #45
Main Jets: N/A
Main Air Jet: N/A
Throttle Valves: 79°30

Rebuild Kit: Comprehensive.
Parts Replaced:

- All Material Gaskets
- All Rubber Seals
- All aluminium Washers
- All Copper Washers
- Float Pin
- Float Valve
- Throttle Shaft Spring

what eng you using Chris afta selling this?

Hi Hamza, could be done. But you'd have a battle on your hands with jetting and choke sleeve sizes.

Serving each cylinder with it's own carb barrel/throat calls for a cam upgrade (as a minimum) and the head should be worked as well to get the full potential from these carbs, then you have electronic ignition etc etc to deal with.

So yeah doable but for the little performance gain it wouldn't be worth it. You could put that money toward an oval port head/induction and a street cam. Then again Tommo73 reported impressive performance gains with twin dellorto's and stock engine, I guess the ball is in your park.

Otherwise, I'm considering selling my A12 engine. Not sure if you'd be keen on that. It's had lots done to it and I've just rebuilt it and run it in so all the teething issues are ironed out. Goes like a cut cat..... and screams like a banshee, will spin to 8500 happily and go beyond but the power curve drops after that (peak power at about 6800-7000 but another cam can bring that peak earlier on in the rev range, the cam I have is stupid big 322 d-adv.).

If you want an engine to replace what you have I can probably build something for you or supply you with the A12 bottom end advertised before, flat tops, cam, balanced.

Wish i had the $ ... Would those webbers be a good upgrade on a stock A12?

Bump

Round Dash Fascia separated from the dash, kinda dusty but nothing that a bit of detergent and soft toothbrush won't fix.

" R) Datsun 1200 Round Gauge Cluster including dash which is rough, can separate the good condition cluster."

Can supply oval or round port mild steel flange with the bike carbs to make a manifold up.

Items marked in red are sold.

C'mon people send me offers on the other stuff. Bike carbs are bloody fantastic and so are the webers would love to see them go to a member here.

Take advantage of the relatively private market here and get what you want before it goes to eBay (I hate selling on eBay prefer to sell here).

Bike Carbs, cleaned and inspected A1 Condition:

chris can you sent us a price for the webber adapter and manual plz?.