Hi Guys

Took the engine bay gear box and the differential and also initial primer coat was applied manually to the engine bay


thanks
regards
sumith

Attach file:

---

  DSC00292.JPG (109.65 KB)


  DSC00293.JPG (119.60 KB)


  DSC00294.JPG (112.46 KB)


  DSC00295.JPG (114.77 KB)


  DSC00296.JPG (115.95 KB)

hey keep up the good work!

i like paint job 2, paint job three could look better if you have silver instead of black?

Ho Guys

Removed the windscreen too and had a one place corroded

thanks
regards
sumitrh

Attach file:

---

  DSC00276.JPG (112.39 KB)


  DSC00277.JPG (115.44 KB)

Hi Guys

Sunday was free for me and could do lot of work compared to other days.Removed the whole wiring harness off including dash gauge and board air conditioner and also removed the battery box and also could cut 2 flow board panels too.

Thanks
Regards
Sumith

Attach file:

---

  DSC00285.JPG (120.48 KB)


  DSC00286.JPG (119.99 KB)


  DSC00290.JPG (113.78 KB)


  DSC00291.JPG (105.40 KB)


  DSC00288.JPG (93.84 KB)

Hi Guys

Just did a little work on photo shop for the final product of mine which is in my mind
I don't know how to match exact Nissan color from Photo shop, since this is my first photo shop work i have ever done

forget about bonnet color line differ i can't paint it on my knowledge of Photo Shop

thanks
regards
sumith

Attach file:

---

  last.jpg (65.91 KB)


  last1.jpg (64.99 KB)


  last2.jpg (66.47 KB)

HI Guys


Cleaned the fender inside area and engine bay a little and put a oil primer hand coat.

thanks
regards
sumith

Attach file:

---

  DSC00274.JPG (111.19 KB)


  DSC00277.JPG (99.85 KB)


  DSC00278.JPG (101.46 KB)


  DSC00280.JPG (113.28 KB)


  DSC00281.JPG (105.11 KB)


  DSC00283.JPG (91.99 KB)

Hi Guys

Work done on last week was minimal, could sand it further with 320 and 400 grit,floor board was not in very good condition for same places, thought of putting a new
metal plate and brought 19 metal plate .


thanks
regards
sumith

Attach file:

---

  1.JPG (71.12 KB)


  2.JPG (77.86 KB)


  3.JPG (62.54 KB)


  4.JPG (91.57 KB)


  5.JPG (115.12 KB)


  6.JPG (93.36 KB)


  7.JPG (91.50 KB)


  8.JPG (95.68 KB)


  9.JPG (83.11 KB)


  10.JPG (79.82 KB)

Hi Guys

I have replaced the Master pump and all brake washers, after that
i have a problem now master pump doesn't deliver oil into break and cluth lines, what would be the case any suggestions ?

The Piston which is having 2 Rubber Washers on top has to be inserted first into the master pump or the other one ?

I got stuck on this , need you guys help please,immediate response is appreciated


thanks
regards
sumith

Hi Guys

Managed to sand down primer and body filler and also right behind door

thanks
regards
sumith

Attach file:

---

  DSC00162.JPG (102.63 KB)


  DSC00163.JPG (97.25 KB)


  DSC00164.JPG (101.73 KB)


  DSC00165.JPG (87.60 KB)

Hi Guys

Completed :Little Body Filling have to sand them down yet, and also cleaned the rear brake drums and primer it

Thanks
regards
sumith

Attach file:

---

  DSC00147.JPG (73.18 KB)


  DSC00148.JPG (67.52 KB)


  DSC00149.JPG (63.42 KB)


  DSC00144.JPG (85.38 KB)