Picture shows piston at bottom
Those seals look right way around

Other piston the 2 seals close together are supposed to be opposite each other... hard to tell by pic
The one closest to end has lip pointing back up the bore oppositre to all the others
SO 4 face down the bore... and the one faces up

Put the bottom piston in and push it down with a screwdriver and hold it all the way down the bore
Then fit small screw that stops the piston coming back too far
Then release the screwdriver and the piston pops back and stops on the pin
Then refit top piston and circlip

Hi dattoman_1000

do you mean piston with the 2 seals closer has to face each other ?

thanks
regards
sumith

Yup. thats what I mean