+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
How would you fix this?
AgentWright007
Posted on: 2011/2/26 17:09
My 210 had been hit here before i got it. The guy i bought it from had someone quickly beat the large dent out leaving a bunch of "cellulite". Ive started sanding it down and using hammer and dolly to fix some of it. Im not experienced with body hammers so i havent done much. A replacement panel is not readily available or easy to replace, and i dont want to just go over it with a bunch of filler. Opinions? Thanks - 007
Attach file:  210 panel.jpg (102.18 KB)  
#2
Re: How would you fix this?
ddgonzal
Posted on: 2011/2/26 18:01
more hammer & dolly
use shrinking hammer also then finish with a very light coat of filler take your time, it will take a couple of hours
#3
Re: How would you fix this?
datsa73
Posted on: 2011/2/26 18:03
Depending how deep the ripples are you can skip bonding filler and use fiberglass filler which is more durable. Its the purple stuff in the gallon can. The proper way is to cut the fender out and weld a new one in. Fast and easy, use fiberglass filler.
#4
Re: How would you fix this?
AgentWright007
Posted on: 2011/2/26 19:26
Thanks for all the info guys. Let me know if you think of anything else.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
