I GOT "HEAPS" OF ENGINE PARTS NEW AND USED
A12/A14/A15 ENGINES/HEADS/CRANKS/STD CAMS ETC. SUITABLE FOR RECON(OR CAN BUILD ONE TO SUIT YOU)TO MUCH TO LIST, LOCATED IN SYDNEY FOR PICK UP. IF YOU NEED SOMETHING GIVE ME A CALL ERNIE 0412 864 741 NEEDS TO GO TO MUCH THERE PRICED TO GO. CHEERS

hi mate
any twin weeber/dello/mikuni/sus and manifolds to suit h89 oval port heads?
chees

NO, got (2) 32/36 webbers missing minor bits(sold), one has adapter.also got 4 bolt round port & oval port inlet manifold
still getting into the piles of stuff. 4 new ute rear blinkers 3 chrome 1 black.

1st list; A12 +060cast pistons & rings flat tops(NEW) $240

A15 +040cast pistons & rings dish (new) $250


A15 +060 cast flat top pistons & rings & conrod combo(new)
(rods have been bushed/new bolts & balanced.this is a floating little end set up,also has pin buttons)$550

A15 USED forged flat tops pistons &
rings(77.5mm)with valve reliefs on shotpeened rods. (note; 1 piston has marks in crown of piston.didn't affect it (also have used block to suit & used knifed egded a15 crank(need linish) 060pins/040maims to suit (can supply new bearings)ex race engine be a good sh##ter as builder say haha. cheers


USED A14 Lightened/Knife edged & indexed crank 040pins/010 mains ( measures good,just needs a linish)$300 (SOLD)



0412 864 741 or pm

A series "MAGNETO" in good working order $500

1 used electonic dizzy unknowm works(sold)

HEADS; USED H89's (suit reco)

H75 used suit reco ported/double valve springs/72mm thick

freee bump

crane dizzy sold.thanks

do u have any a14 or a15 heads or sunny gearboxes.

Have you got any standard (73mm bore) A10/12 flat tops?