just wondering what thermo fans you guys have use with your sr/ca conversions ?
i need something very thin?
any help would be good

heres a picture of the kind of space i have

You might need to do 2 push fans on the front of the radiator instead.
I did on the L series too. I only run 1 10 inch currently

yeah that or 2 8 inch fans and sit them up a bit higher on the radiator out of the way of the bottom pulley

Then they don't cool whole core, better having push covering whole core.
Pull is ideal but 2 8 inch not as effective usually as I 10 inch or 12 inch.

i tried a 12 inch from my old a series set-up...too big,

10inch in the front pushing, works for me. Just make sure fan blades orientated right way and when on spins right way to push air onto rad.

I use a 10" fan on the front of my radiator due to the gilmer drive taking up a lot of room.. Works perfectly fine but it's on a switch.. Leave it off until it reaches operating temperature..

Only leave it on in heavy traffic and under 60kmh. Rest of time it's fine unless uphill and giving it a bootfull

Spend the money and get a thurmo switch, and u can get good thin fans from a Hotrod shop or auto parts place! I got quoted 230 each for 10" but is real fan not crap made in china stuff

I'm working on a thermo switch from tridon thermo switch for $10 likes top hOse temp range not bottom hose. Top hose hotter