Yes will be able to supply a weld on washer to suit

In stock NOW

Hi. I race a 1200 in SCCA's HP class. Wondering if these kits will fit a stock 1200 strut and how much you get for them. Will also need the weld-on washers you are speaking of. Thanks.

No they don't fit stock 1200 struts, sorry!
I have washers and coilovers in stock now

What do you mean by '8kg'?

Are they somewhere around 200lb - 225lb - 250lb?

447 pound but for total price $250 I can supplie and 8" spring with rate from 1kg to 18kg
1 (kg / mm) = 55.9974146 pounds / in
2 (kg / mm) = 111.994829 pounds / in
3 (kg / mm) = 167.992244 pounds / in
4 (kg / mm) = 223.989658 pounds / in
5 (kg / mm) = 279.987073 pounds / in
6 (kg / mm) = 335.984488 pounds / in
7 (kg / mm) = 391.981902 pounds / in
8 (kg / mm) = 447.979317 pounds / in
9 (kg / mm) = 503.976731 pounds / in
10 (kg / mm) = 559.974146 pounds / in
11 (kg / mm) = 615.971561 pounds / in
12 (kg / mm) = 671.968975 pounds / in
13 (kg / mm) = 727.966390 pounds / in
14 (kg / mm) = 783.963804 pounds / in

Okay then... thats a different way of measuring it.

The 8kg springs are pretty heavy in that case.

I can supplie any pound springs for extra $50

Right just ordered some springs, 200mm by 225 pound, 250pound, 275pound springs
So these can be sold for $250 with sleeves hats ect

thats good price, i paid $150 for springs alone (not from fatto, from an ozdat guy that had them custom made for his 1600 but they were too stiff for the rear set up)!!!! and that was a good price.