Just a note these have imperial spline.

Who told you they were worth four times as much?!

Give them a swift open hand slap and tell them they're dreaming- It ain't no LSD, and although the alloy is lighter it's a much, much weaker housing.

Imperial spline? Like 12 instead of 10 splines?

This would be great for an H190 rear axle assembly behind a 4-cylinder engine.

hey mate have u still got those 1000 bumpers?

no sorry the bumpers are sold.. and haters gonna hate. it's still worth what I'm asking. these can't be too common as the wombles of wimbledon! I'd like to see you go to the local pick a part and grab one.

From the pictures of the diff I have seen it has 8 bolts holding it on so it's a h165 alloy carrier, h190's have 10 bolts.
If theres a problem with the axle splines count/size - just change the planetary gears or the whole centre..

It was advertised as a H165 just DD missed the post, however I got 1 at PAP 10 years back and about 6 have come in since in that yard just couldnt be bothered pulling them out. I sold my first to Dodgeman for 80 dollars inc postage. USA site Ratsun members offered me around $150usd delivered as engine upgraders go to H190 as the h165 alloy caps do suffer spread at over 120hp (as Feral stated). I got another 2 at Andys wreckers recently for $30 each and swapped them with 2 bluey centres they didnt know, but if Mine wont be seeing over 100hp at wheels if I ever use it as I also have a H190 alloy that is easier to get ratios for and only 4kg heavier than cast iron H165. The other I swapped 2 weeks ago for a 411 radio cover plate :)

anyway, I need this gone . price dropped to $320 . I also have one of those 411 radio block off plates D mentioned too, that I might be willing to part with.

Rockon : you need to contact me about your bumpers ;)

I'm puzzled now, well how come in the datsun wiki it says they are a H190? or at least have H190 parts in them.

*edit* also decided to sell my Datsun 1000 sports steering wheel as I've decided to get a nardi. Will go on a 1200 or 120Y but the indicator cancelling pins have been specifically modified to suit a 1000. $60 with boss kit. will post some pictures later on.