The brackets I have for 250mm brakes wont work with the 280m brakes.
I found the 250mm brakes to be plenty good enough.

Ok thanks bunny just about to build a Coilover setup and this combo so has come up at the right time, also looked at another members setup last night and we both assumed this :) thanks once again! :)

Yep, your on the money, recycle the wheel studs from the S13 hub. A little bit of lathe time for the B110 hub [OD for the rotor to sit on top and the b110 hub snout, so that the rotor locates centrally on the hub.]

So with this setup you need to have to outer of the hubs turned down to fit inside the disk as it becomes a floating disk setup, you need to replace wheel studs with longer ones, and you either need to machine Center boar of the disks out or machine the bearing section of the hub down to fit disks as well, is all this correct?

B110 struts, b110 hubs, 250mm S13 rotors and matching calipers. Wheel is a 13 X 7 Watanabe.

thanks Ben, what that combo you have there?

cheers Rod

pm's replied.

edit, also a couple of pics for reference and quality of manufacture.

cheers

Sorry for the hijack..But does any one have the dimension for the custom s13 bracket used on the 120y strut for brake mods??

PM sent

pm-d ben