+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#11
Re: Spark from coil, but not from distributor. Any advice?
clyons8
Posted on: 2012/11/13 6:53
Quote:
So be sure to connect both wires from the 1200 harness to the coil+ terminal. These are the two wires that connected to the ballast resistor So this is not how it's supposed to be? I tried that Benny but no win, no spark at all now  Will get out with the test lamp and if the ignition is circuit is faulty I'll bridge the ignition (as Dylan suggested) and see if there is any success then. I really need to improve my understanding of electrics, totally flying blind here   
#12
Re: Spark from coil, but not from distributor. Any advice?
benny
Posted on: 2012/11/13 7:14
Also check the clearance between the pertronix module and the pickup magnet(s) that sits under the rotor button. As close as possible, but not touching. maybe the issue is that the pertronix unit is not triggering...
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
