What coolers that?
Looks good glen

Cadet, yeah the same fabricator did the radiator panel.
It reinforces the panel a little bit as I cut away the rad support and also
holds the twin spal thermos and rad in place...I'll ask what he would charge for it. I had the car, my business partners jeep with some tailgate mods and a new stainless steel flue for our new coffee roasting facility all on the one invoice.

Supafatto, it's an aeroflow black cooler..cannot recall dimensions, there is another panel underneath supporting the intercooler. Best part is you cant see a thing when it's all together. I'm not a fan of flashy coolers.

Well.....
After replacing a shot gearbox xmember I took it for the first drive tonight!
Ran 10psi and it hammered!
Pics and vids coming soon.

Still a bit more to do but stoked so far.

Nice stuff Glenn. See l series should be stock for those and ca after lol.

Some more pics guys, Thanks benny for the wheels

Build update: Rebuilt front end going in tomorrow. I have the coilover and camber tops ready to bolt in, but yet to find some one to machine down the hubs for the s13 conversion up here...and the time to find them.

Have a slight vibration above 80km and need to re adjust the diff pinion angle, but holding off on doing until i put new leaf springs in the rear... currently on blocks and dont really like the harshness of them.

Chasing a couple of little oil leeks from the gearbox too. Thinks its from the front bearing cover but its an engine out job to fix :( Now wishing i had enlarged the tunnel...Lol

its running well and goes hard, happy so far but so far to go yet before the blue plate go on.

Attach file:

---

  253316_10152614715909724_6649966904687689128_n.jpg (156.40 KB)


  10672253_10152614716499724_7776781810249485978_n.jpg (73.07 KB)


  1150353_10152614716409724_5356315046325896984_n.jpg (85.74 KB)


  10626525_10152552358744724_8678538105226230399_n.jpg (84.76 KB)

Nice looking ride, good job.

Good to see you finally got the new ca18 in after you blew the last one up :p
Did you fit the new dash too?
But looking clean my friend! If you have instagram add my build thread ;)
Name is bagged_datto_project

Thanks Tomtom
Ive held onto the dash as its got no cracks whatsoever and the dash in it now only has one thin crack. I also need to take the windscreen out to drill out the three top dash screws as they are thrashed and stuck in there.
Ill find you on instagram!

Get those videos posted Glenn.

I want to see that machine haulin the beans around Port Douglas

Update:
in the middle of s13 brake and nick's coilover conversion with camber tops.
Bean a bit caught up with the business (pun intended) to work on the beast,
more pics coming