The remote reservoir has to be higher so that the fluid doesn't run out.

stock lengths

It's the length ,and don't the remote res have to be higher than the master so air doesn't get trapped in the line?

What would make my charge light stay on after I turn car off..and I have to disconnect the battery.... and the voltage reg clicks when I undo the battery????
And I'm cranking out 15.50 + Volts.....BAD REGULATOR ??

Possibly Wilwood has compact versions.

It is the length or the height that is a problem? It's easy to fit remote fluid reserviors.

Is there any options for the break master....a smaller version of the master?

I just barley started her I will finish tomorrow and break in. I will let you know.

OK, let us know how the extensions work out. How's she drive with the four carb barrels?

I'M HAVING TROUBLE FITTING DASH BACK ON.Master is just hitting the speedo.I will have to make some extension peaces to bring dash out about 1 half to 2 inches. I hooked the dash wires up and turned the key and she came alive !

I drilled two holes just big enough for the lines and they will be routed through the hole the break master left.I am very pleased on how well it works.Thanks for everyone's input.Now to fit the dash back on!
Here is a pic of the motor.

Attach file:

---

  008.JPG (194.16 KB)

Made a mistake he ones I saw where for the clutch MC
Jasons one
http://datsun1200.com/modules/newbb/v ... =ASC&type=&mode=0&start=0

heres another
http://datsun1200.com/modules/newbb/v ... id=175022#forumpost175022

Nice work victor!