Very nice work

That does look cleaner!. My Cam cover has a gasket. The hardest thing was making sure that the timing marks were in the right place. I don't have a heater and I got tired of that outlet pipe disitegrating, so I turned a new one out of 316 stainless....

Attach file:

---

  A14Block_12-loRes.jpg (177.30 KB)


  HeatShield3_LoRes.jpg (187.50 KB)

Love the removable front cover made from another front cover for the timing case!
Is it stepped underneath or just using a sealant/ gasket etc.?

Also if you have a heater this can be done neater than I did but just wanted to
prove to myself it worked and looked cleaner than sitting on the inner guard.
The heater pipe return was cut and reversed so the heater line runs under the
exhaust and inlet hidden away from view.

a few pics....

Attach file:

---

  DSCF4869-lo.jpg (189.03 KB)


  DSCF4861-lo.jpg (173.77 KB)

yep best in the universe was right!

A14 Block, A14 Crank cross drilled, knife edged, and nitrided.78mm Ross forged full floating pistons with titanium pins. Forged H-beam rods. Hollow Lifters, Aluminum roller tip rockers with solid spacers on thick walled shaft. Smith Bros tubular pushrods. Ported H89 head, 38mm Intake, 32mm exhaust, tapered bronze guides, 10,000 RPM double valve springs with titanium retainers. Chromoly Flywheel. All fasteners are either ARP or titanium...etc.

Darn sorry read it wrong!

pics of the body, tailights etc ;)

I hope that seal sleeve works for you, I cant remember but if you can quickly run through the specs of that motor eg. block, crank and bore size?

Thanks D!
The front of the engine isn't leaking.. Back of the motor, and the front of the gearbox is..

Probably best try the seal sleeve on the front and see if it cures it before taking the engine out, that way at least you know the front seal doesnt work then you pull the engine out to check the crank and go from there etc.

Im still waiting for some bigger pics of that beast the best coupe on this forum and universe

Yes thanks, I've already got one. I just want to verify that this is the problem. The stupid engine's already been out twice now for inspection. I want to make sure that this is the last time.
P.S. Thanks for the info DD!