+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
2.5 degree camber rear axle
ddgonzal
Posted on: 2014/12/19 7:16
cut-n-weld for negative camber
Attach file:  1.jpg (29.32 KB) 2.jpg (30.58 KB) DSC_0083.JPG (129.62 KB) DSC_0185.JPG (145.44 KB) DSC_0155.JPG (104.93 KB)  
#2
Re: 2.5 degree camber rear axle
levey
Posted on: 2014/12/19 8:20
impressive, surely this mod will cause a lot more wear on the diff center??
#3
Re: 2.5 degree camber rear axle
ddgonzal
Posted on: 2014/12/19 8:27
He says more than three years of driving with no problems ...
#4
Re: 2.5 degree camber rear axle
levey
Posted on: 2014/12/19 11:01
Cool, that mod would look awesome on any 1200 .
#5
Re: 2.5 degree camber rear axle
b310gx
Posted on: 2014/12/19 22:50
The end of the axles are machined slightly so the top edge of the axle is always parallel to the spider gear, while the bottom sits up. I believe Jeff Hanson ( Rfast) has done this to the axles in his Sunny. The 'semi mythical' Stanza H190 housing had this done. I know of a local Stanza rally driver who threw away his rear end because he thought it was bent. Wish he'd thrown it my way. He now runs a Hi-lux diff thats been bent for rear camber.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
