User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



« 1 (2)


Re: 120y borgwarner into a 1200 ute
Home away from home
Joined:
2010/8/11 12:04
From Kelmscott Western Australia
Group:
Registered Users
Posts: 651
Offline
The axle housing on the datsun 1200 is about 40mm
The borgwarner is about 60mm

Posted on: 2015/11/29 10:11
_________________
71 Datsun 1200 ute with A14 fuel injection and T50
59 Morris minor ute with A15 fuel injected with intercooled turbo
Transfer the post to other applications Transfer


Re: 120y borgwarner into a 1200 ute
Home away from home
Joined:
2010/8/11 12:04
From Kelmscott Western Australia
Group:
Registered Users
Posts: 651
Offline
Not a good photo but the diff is in

Just slotted onto the springs on the big washers that got made got the shock plates to still fit correct as 2 U bolts are sitting a bit sideways and i need to find wider bump stops to suit and the 120y cable on the diff dosent fit as its to short but i think the 1200 h145 diff cable is slightly longer so i have to try it out tomorrow

Attach file:



jpg  IMG_0717.jpg (99.48 KB)
13822_566be6d677a85.jpg 392X294 px

Posted on: 2015/12/12 9:23
Transfer the post to other applications Transfer


Re: 120y borgwarner into a 1200 ute
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Looking good

Posted on: 2015/12/12 9:49
Transfer the post to other applications Transfer


Re: 120y borgwarner into a 1200 ute
Home away from home
Joined:
2010/8/11 12:04
From Kelmscott Western Australia
Group:
Registered Users
Posts: 651
Offline
I havent done the finished product post since i put the ute back on the road in september Lastyear

Pretty much the drive shaft Out of the 120y has to be shortened by 20mm to allow it not to chew out the gear box seal

In the end i found some diff plates out of a 120y coupe/wagon i cut the original shock studs off and put the 1200 ute size to suit it ended up being 16mm bolts wiith spring washers


Makes a nice diffence on the road esspecialy down the highway with the efi and 5 speed for good measure

Posted on: 2017/5/26 13:47
_________________
71 Datsun 1200 ute with A14 fuel injection and T50
59 Morris minor ute with A15 fuel injected with intercooled turbo
Transfer the post to other applications Transfer



« 1 (2)



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]