Rebel blue...

A Volvo S60 colour perhaps?

Thanks David.

Has any one picked where I copied the colour from ?

It's road car name is Rebel Blue.

Any guesses as to the other name and who the manufacturer is ???

looks so nice

Time to bolt on the panels.

The doors were fitted, but removed again to improve access for in cabin fit out.

Also fitted the strut tower brace. More of MADDAT's stuff,
and the Grill and Aluminium "head lights".

Attach file:

---

  strut brace .jpg (152.61 KB)


  panel fitted 1 .jpg (146.34 KB)


  panel fitted 2 .jpg (158.39 KB)


  panel fitted 3 .jpg (139.26 KB)

The fibreglass door skins are very light, my guess would
be less than half that of the steel door.

The drivers door is now very flexible and will twist if
grabbed in the wrong spot.

I told the fiberglass guy the bits were going onto a race
car so he made them thin.

The door skins are made from what looks like woven cloth,
where the boot skin looks like normal glass matt.

So now it all fits (or so I thought) it's of to the
paint shop again.

Attach file:

---

  panel painted 1 .jpg (150.98 KB)


  panel painted 2 .jpg (134.76 KB)


  panel painted 3 .jpg (126.76 KB)

Are the fibreglass door skins much lighter than the original steel skins?

You hold very good attention to detail.

The door skins are folded over the frames and brased in 6 places.
No spot welds.

The skins folded off the frames quite easily and the brase welds
were split with a cold chisel and filed clean.

The fiberglass skins were then "glued" to the frames using panel sealant
and held in place with cloth begs until dry.

All the glass panels were fitted and trimmed to size before going out for paint

Attach file:

---

  door fit 1 .jpg (115.72 KB)


  door fit 2 .jpg (137.92 KB)


  panel fit 1 .jpg (118.68 KB)


  panel fit 2 .jpg (63.51 KB)


  panel fit 3 .jpg (137.19 KB)


  panel fit 4 .jpg (97.29 KB)


  panel fit 5 .jpg (130.27 KB)

hmm those doors look nice.How did you get the skins off.Did you just bend the edges back or is there spot welds.

The doors are going to get fiberglass skins.
there is not much left once the skin is gone
and they have been modified to clear the
safety cage.

Attach file:

---

  door fit 4 .jpg (135.77 KB)


  door fit 6 .jpg (111.63 KB)