SR20DET is a fine choice, many have successfully swapped into Datsun 1200

The lower control arms are perfectly fine for the power of the SR20DET -- no need to change them.
* To handle the extra weight of the engine, fit stiffer springs
* If you want to adjust camber, you can move the top mount or install camber tops. See Camber


The purpose of brakes is to stop the car:
* If you plan on driving faster speeds, it's a good idea to improve the brakes
* If your government requires brake upgrade when engine swapping, then upgrade the brakes
* If you plan on exceeding the vehicle weight capacity, then upgrade the brakes. SR20DET adds about 150kg to the car, which is still within specs (like carrying one or two passengers). But to carry four passengers + the extra weight it would be a good idea to upgrade the brakes
* If you value increased safety in general, then upgrade the brakes -- even if you have a stock A12

Luigi from Portugal is swapping S13 Japan brakes into his 1200. I suggest swapping the S13 EUROPE brakes, which are larger and more common but require 14" or larger wheels

If you want to use 13" wheels, I suggest swapping the Datsun B310 245mm brakes (1200 brakes are 212 mm, so this is a substantial upgrade)

Hi guys!
Now that I've decided on what engine to use on th 1200 (SR20DET) I know need to get parts that can handle all the power of an SR20. I will need new, better and bigger brakes, a better and stronger diff (LSD if possible), adjustable control arms, lower arms, etc and suspension (coilovers maybe?).
So far I found a nice website that sells some parts for the B110. It's called Maddat.com.au. They nice parts, but I was wondering if there are other website with more products. The other website I know is Technotoytuning.com. They wave a lot of parts to the 240Z and the B510, but not to for the B110.
Anyway, any websites you guys may know or good parts to use please tell me.
Cheers from Portugal!