Hi, my friend is selling s13 front caliper conversion bracket. I just finished installing them on my car and took photos to help people installing them..

He is asking 60usd a set + shipping. It is for stock USDM 240sx s13 caliper and disk, here is the list of the parts and what you'll need to do to do the conversion.

-240sx s13 front calipers NO ABS
-240sx s13 front disk NO ABS
-240sx s13 front hydrolics line NO ABS
-240sx s13 front pads NO ABS
-240sx s13 wheel studs (longer than the ones for the 1200)
-2x 12mmX1.25 x 41mm bolts with lock (need to confirm)
-2x 10mmx1.25 x 25mm bolts with lock (need to con firm)

You'll need to :

-have your disk hub machined because the interior diameter or the disk is smaller than the exterior diameter of the hub
-cut a little piece of the bottom of the guard to clear the bottom of the 240sx caliper bracket
-MAYBE have to grind the 240sx caliper brackets to have them clear the lower mount of the strut (see pictures)

I ordered all the parts from the 240sx on rockauto, was kinda cheap

If you have questions don't hesitate !

Attach file:

---

  19225898_1398911376851989_4109389534442204656_n.jpg (38.80 KB)


  19275045_1398911023518691_1117696119514215920_n.jpg (31.86 KB)


  19366047_1398911173518676_2264853381509210541_n.jpg (34.50 KB)


  19260648_1398911733518620_5253482479369755682_n.jpg (35.09 KB)


  19260736_1398911256852001_8370065634023997988_n.jpg (37.25 KB)


  19366195_1398911320185328_1220062977946308141_n.jpg (58.84 KB)


  19225898_1398911376851989_4109389534442204656_n.jpg (38.80 KB)


  19260564_1398911616851965_3744925665571214009_n.jpg (25.06 KB)


  19366403_1398911426851984_5300906790813589379_n.jpg (21.63 KB)


  19396715_1398911696851957_6093053706137450465_n.jpg (40.13 KB)

.