In october my 1322cc a12 motor (less head) will be for sale .$250
Will assist with fitting etc if nessasary.Greg
On the goldcoast

early or late. Dizzy up front or midway?

Late motor 77.5mm bore 3cc dish flycut pistons

Would this be suitable for street use?

Or is this a big Cam duration kind of deal?

It is a big cam motor approx 5000-9500rpm and on e85 fuel

Sounds like a great deal.
I'm assuming you would have spent some big coin getting this together.

Good luck with your sale.

My interest was for something boring and standard-ish.

I have a 1mm oversized engine in bits in the shed i wont be needing after october Be a goodstreet motor

I'll keep it in mind.

I am still a little undecided as to which path i should go down.

(Have some A engines here already and not decided which one is my best option)

Was wanting something approx 1.4L capacity for lazy torque.

Saw your bottom end as only needing a head and thought it could save on engine build costs.

You would need a good head and carbs togo onto my engine

The motor is for sale now.
It will need new rings
Do it yourself or i can fit them for you.
Offers over $250 pickup only.Greg.
Call me would be best.0413670839.