User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


CA18DET - PCV, Water and Vacuum hoses
Quite a regular
Joined:
2008/5/26 6:39
From Melbourne, VIC
Group:
Registered Users
Posts: 59
Offline
Hi guys I have been trawling both the Tech Wiki and good old Google but I am struggling to find any clear information or drawings to show the correct factory layout of all PCV, Water and Vacuum hoses on my CA18DET.
It is an S13 RWD engine and I am trying to put it back as close to factory as I can.
I don't want to run a catch can at this stage either.

Any pointers would be most appreciated.

Posted on: 2018/7/3 11:40
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Guest_
.

Posted on: 2018/7/3 13:05

Edited by unfamilia on 2020/3/29 12:25:14
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Guest_
.

Posted on: 2018/7/3 13:08

Edited by unfamilia on 2020/3/29 12:25:26
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Quite a regular
Joined:
2008/5/26 6:39
From Melbourne, VIC
Group:
Registered Users
Posts: 59
Offline
I have checked about 3 different versions of the manual and there is nothing specific in there about it.

Posted on: 2018/7/3 14:28
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Home away from home
Joined:
2013/3/31 0:08
From Geelong, Victoria
Group:
Registered Users
Posts: 263
Offline
This thread helped me, but I still needed to figure a few things out for myself.
http://forums.nicoclub.com/intake-man ... ose-diagrams-t572062.html

Posted on: 2018/7/3 23:58
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Home away from home
Joined:
2013/3/31 0:08
From Geelong, Victoria
Group:
Registered Users
Posts: 263
Offline
This is also in the S13 CA18 service manual

Attach file:



png  PCV.png (102.25 KB)
17122_5b3c00c53be63.png 1222X802 px

Posted on: 2018/7/4 0:03
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Home away from home
Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
Posts: 280
Offline

Posted on: 2018/7/4 3:42
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31347
Offline
This is the PCV layout -- 2 hoses. since everyone uses custom air intake they use the air duct a little different but factory it goes on the elbow duct after the MAF and before the turbo

Attach file:



jpg  CA18DET PCV.jpg (58.81 KB)
174_5b3c7c1d83c05.jpg 400X300 px

Posted on: 2018/7/4 8:49
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Quite a regular
Joined:
2008/5/26 6:39
From Melbourne, VIC
Group:
Registered Users
Posts: 59
Offline
Yeah the top two PCV hoses are pretty straight forward, its the one from the block to the back of the Right hand rocker cover that i need a bit of guidance for.
Also the standard configuration of all the heater and water hoses that it is hard to figure out.
I think i have most of the stuff under the intake sorted, but its the heater return back to the block that is also hard to find a pic of.
Also Vacuum lines are all over the place too.

Posted on: 2018/7/5 4:24
_________________
We spent 16 years seeing other cars and other people, but now we are back together.
We are both a bit older and a little wiser, we have a few scars and plenty of stories to tell.
Time to rebuild the old relationship and enjoy many more years together...
Transfer the post to other applications Transfer


Re: CA18DET - PCV, Water and Vacuum hoses
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31347
Offline
can't find a pic, but here's a re-working of the Nissan diagram from 1200ute's link

it's just standard hose and steel tubing
the arrow connects to the side of the cam cover

Attach file:



jpg  CA18DE block breather 118-A_01 -.jpg (29.05 KB)
174_5b3dedf52b940.jpg 560X528 px

Posted on: 2018/7/5 11:07
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]