User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   2 Anonymous Users





HELP- A15 with original injection inlet manifold need help setting up
Just can't stay away
Joined:
2003/3/3 11:40
From Queanbeyan nsw 2620
Group:
Registered Users
Posts: 78
Offline
hey guy

I have a A15 engine and recently purchased a original inlet manifold and need help getting it sorted, Ive always had datto my whole life but never played around with A series engine always rotarys my question is I have a LT-10s micotech computer left over from another car and getting it re maped… if anyone can help your input or anyones input who have down in a simpler way anything.. also where to get a inlet gasket as the injection on have that little spot at the top for the injector I would like to go the micotech way so I can control spark and fuel not just fuel anyways any help would be helpfully at the point to get started
Thanks Adam

Posted on: 11/16 7:20
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 30815
Offline
hi adam you can use a standard A14/A15 gasket and notch it. use the H89 type wet gasket (for manifold with water ports)
Open in new window

Posted on: 11/17 21:06
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 30815
Offline
Do you have the matching air flow meter and ECU? If so I would just install all the Nissan factory parts and get it running. Later you can experiment with modifications

Attach file:



jpg  airflow_meter.jpg (99.46 KB)
174_5dd1b9f6947a9.jpg 806X1000 px

Posted on: 11/17 21:21
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Just can't stay away
Joined:
2003/3/3 11:40
From Queanbeyan nsw 2620
Group:
Registered Users
Posts: 78
Offline
Hey mate yeah i have that part aswell .. tho Microtech got back to me and remap my computer LT-10s
I just need to find the guy on hear who is locking the elec dizzys up it and one knows him or knows where i can buy one from??

Posted on: 11/20 16:23
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Home away from home
Joined:
2010/8/11 12:04
From Kelmscott Western Australia
Group:
Registered Users
Posts: 640
Offline
buy a14 inlet gasket and notch you also need to notch the head as well

Posted on: 11/21 6:34
_________________
71 Datsun 1200 ute with A14 fuel injection
59 Morris minor ute with A15 fuel injected with Sc12 supercharger
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 30815
Offline
locking the distributor is easy just put some JB Weld on the slots see our tech article and photo at Locking The Distributor

Posted on: 11/21 8:20
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Just can't stay away
Joined:
2003/3/3 11:40
From Queanbeyan nsw 2620
Group:
Registered Users
Posts: 78
Offline
Is anyone mass producing Turbo exhaust manifold or people just making there own?

Posted on: 2019/12/3 1:37
Transfer the post to other applications Transfer


Re: HELP- A15 with original injection inlet manifold need help setting up
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 30815
Offline
chris produced turbo manifolds, but no longer


About the gasket, Datsun made seven different A14 oval port gaskets all shaped a little different

Use the H89 one although there isn't much material at the top so be careful how you notch it. I'd bolt it first to the manifold and mark it so you can remove just the minimum material for the notch. Using a thin but sharp chisel you can easily cut a rounded notch. Supplement it with a thick little bit of RTV above the notch (let it tack up before bolting together -- as per the directions on the RTV package)

14035-05H01 has superceded the H89 gasket and appears to have bit more room above the ports
Open in new window


Or you could use the GX gasket 14035-H2300, looks like no notching is needed
Open in new window



The original EGI gasket looks like this
14035-H9201
Open in new window

14035-H9202
Open in new window

Posted on: 2019/12/4 9:10
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]