User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





1000hp pushrod v twin!!!!
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From Melbored
Group:
Registered Users
Posts: 10700
Offline
at 14 mins
https://www.youtube.com/watch?v=8-780OUaxCc

Love on in a datsun 1000 detuned to 300hp its a 50kg engine

Posted on: 12/23 7:06

Edited by D on 2019/12/25 7:52:27
_________________
why you are slaves to Usury https://www.youtube.com/watch?v=FEheU28ea3c The Anzac Deception unknown by dumb Aussies http://www.anarchistmedia.org/pdf/The-Anzac-Myth.pdf ""
Transfer the post to other applications Transfer


Re: 1000hp pushrod v twin!!!!
Home away from home
Joined:
2011/1/31 2:06
From melbourne
Group:
Registered Users
Posts: 718
Offline
Dont think you can hide that under the bonnet

Posted on: 12/25 1:35
Transfer the post to other applications Transfer


Re: 1000hp pushrod v twin!!!!
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From Melbored
Group:
Registered Users
Posts: 10700
Offline
Sure is a funny choice when the supercharger is longer than the engine
by 5 fold! would like nice though with a single turbo instead.

Earlier in the vid that 3.2L flat 4 puts out as much boosted hp
as the 14L v16 LS based boat anchor.

Posted on: 12/25 7:53
_________________
why you are slaves to Usury https://www.youtube.com/watch?v=FEheU28ea3c The Anzac Deception unknown by dumb Aussies http://www.anarchistmedia.org/pdf/The-Anzac-Myth.pdf ""
Transfer the post to other applications Transfer


Re: 1000hp pushrod v twin!!!!
Home away from home
Joined:
2011/1/31 2:06
From melbourne
Group:
Registered Users
Posts: 718
Offline
These motors would cost a fortune , probably starting at $45K USD then detuning them would be a waste.

I was close to getting a rebuild rare Caterham RST 2.4 v8 550 bhp with sequential for $23K but were not in the States or Africa and our laws "" Suck ""
I even looked at those 1000 hp Civic motors for $18K , but how long would you get away with it on the road . . . Oh I miss the 80,s

Posted on: 12/25 8:52
Transfer the post to other applications Transfer


Re: 1000hp pushrod v twin!!!!
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From Melbored
Group:
Registered Users
Posts: 10700
Offline
Would never dream of buying their test engine but use the idea
by cutting an LS block leaving the last 2 cylinders etc.

Sourcing a front end collision block, crank can be used with no snout
like latest bmw L6 which uses a bolt into the flush crank/front seal
which also incorporates timing cog. Lighter, no snout to worry about.
Chain cog with good fluid balancer should rid most bad vibes.

Heads even easier while cam again not difficult then you have tremec
bolt up, 2 exhaust for a front mounted turbo. 2litres possible using
8.2 litre version of the LSX crank or use damaged brodex speedway engine.

300hp should be nice from 50kgs with t5 box.

Posted on: 12/26 9:19
_________________
why you are slaves to Usury https://www.youtube.com/watch?v=FEheU28ea3c The Anzac Deception unknown by dumb Aussies http://www.anarchistmedia.org/pdf/The-Anzac-Myth.pdf ""
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]