User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





E series v8 possible? Hacksaw, welding, brain, courage, sweat etc
No life (a.k.a. DattoMaster)
Joined:
2002/10/28 6:49
From under the Firmament LOL no twiglight effect BS
Group:
Registered Users
Posts: 10924
Offline
Best vids on home made engines by an legend genius
v12 from L6 -take note of conrod solution for narrow crankpin!!!!
what a master to employ a Linkrod system @ 4.30min
https://www.youtube.com/watch?v=FnXUx4 ... &ab_channel=AllenMillyard
V8 from L4
https://www.youtube.com/watch?v=sjxiHL ... &ab_channel=AllenMillyard

A series would be insane but pushrods and non crossflow has its limits.
Instead the E series or even a G series head and bores could be used?

60 degree v8

eg. Carbon Steel 8mm plate welded crankcase and separate bore casing for
77mm renault sleeves housing for E16 crank and linkrods with angled cap bolts
Steel plate bore housings and wet sleeves from renault 805 sierra or similar.
3.3 litre v8 77mm bores x 88mm stroke.

too much work but what a project for a Millyard like dude into dattos

Posted on: 2021/1/14 4:17
_________________
"Australia" is formed by all its geographically listed territories "including" Norfolk, Christmas & Cocos Islands. The word include excludes all else before it therefore you have no legal rights.
Transfer the post to other applications Transfer


Re: E series v8 possible? Hacksaw, welding, brain, courage, sweat etc
No life (a.k.a. DattoMaster)
Joined:
2002/8/11 8:22
From Perth
Group:
Registered Users
Posts: 2689
Offline
Get onto it
Couple of B6 heads will cure your pushrod problems

Posted on: 2021/1/14 9:41
Transfer the post to other applications Transfer


Re: E series v8 possible? Hacksaw, welding, brain, courage, sweat etc
Home away from home
Joined:
2010/2/12 12:58
From Near Bundaberg QLD
Group:
Registered Users
Posts: 384
Offline
Turn 2 A10's into an A20 = finally Australian street legal V8

Posted on: 2021/1/14 12:44
_________________
Thanks, Sam-U-El/Racer135
---------------------------------------------
4 utes, 1.5 sedans, 2 120Y sedans, 1 C120, 1 1600 sedan, all look like or are wrecks
Transfer the post to other applications Transfer


Re: E series v8 possible? Hacksaw, welding, brain, courage, sweat etc
Home away from home
Joined:
2012/2/13 1:54
From Mordialloc Victoria 3195
Group:
Registered Users
Posts: 878
Offline
I say "JUST DO IT D" - put all that knowledge to use.
dp

Posted on: 2021/1/14 19:51
_________________
'79 B120 ute(TURBO EFI A15 + 60 ser.5spd )
'83 Clubman 7 ( TURBO EFI A15 + 63 ser.dog 5spd )
'73 KB110 Coupe Mild A15 5spd ( Quad carb revver soon)

keep it simple
Transfer the post to other applications Transfer


Re: E series v8 possible? Hacksaw, welding, brain, courage, sweat etc
No life (a.k.a. DattoMaster)
Joined:
2002/11/26 0:38
From Las Vegas USA
Group:
Registered Users
Posts: 2032
Offline
I read Classic Motorcycle Mechanics magazine and Millyard's builds are routinely featured. Works of art.

Posted on: 2021/1/17 5:03
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]