User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Wtb crankcase breather pipe
Home away from home
Joined:
2009/11/16 1:18
From Sydney, NSW
Group:
Registered Users
Posts: 610
Offline
Hi all I'm looking to buy a crankcase breather pipe in this style

Attach file:



jpg  2546.jpg (87.16 KB)
12667_60d162799c584.jpg 640X480 px

Posted on: 6/22 5:09
Transfer the post to other applications Transfer


Re: Wtb crankcase breather pipe
No life (a.k.a. DattoMaster)
Joined:
2000/1/10 8:43
From Snohomish, WA USA
Group:
Registered Users
Posts: 1255
Online
Put a drag hose on it and plug your intake. You dont need to put that crap back into your cylinders. 👍

Posted on: 6/22 5:20
_________________
'73 2 Door Sedan
KA24DR, Twin Webers 38/38 Sync.
Crower Stage 3 Cams/SS Valves
Forge CP Pistons/ Eagle Rods
Eaton M62 SC 10 lbs. Boost / 150hp Progressive Nitrous
GM 2 Speed Poweglide/Transbrake 3500 Stall
Ford 8.8 Posi/4.11
Transfer the post to other applications Transfer


Re: Wtb crankcase breather pipe
Home away from home
Joined:
2009/11/16 1:18
From Sydney, NSW
Group:
Registered Users
Posts: 610
Offline
I'll be running it to a catch can. We have to for engineering but I wanted that pipe to do a short section of pipe then an AN fitting

Posted on: 6/22 5:24
Transfer the post to other applications Transfer


Re: Wtb crankcase breather pipe
No life (a.k.a. DattoMaster)
Joined:
2000/1/10 8:43
From Snohomish, WA USA
Group:
Registered Users
Posts: 1255
Online
Just use a section of 1" radiator hose.
I just plumbed mine into my exhaust. The exhaust flow sucks any blow by in the crank case out the tail pipe.

Posted on: 6/22 6:32
_________________
'73 2 Door Sedan
KA24DR, Twin Webers 38/38 Sync.
Crower Stage 3 Cams/SS Valves
Forge CP Pistons/ Eagle Rods
Eaton M62 SC 10 lbs. Boost / 150hp Progressive Nitrous
GM 2 Speed Poweglide/Transbrake 3500 Stall
Ford 8.8 Posi/4.11
Transfer the post to other applications Transfer


Re: Wtb crankcase breather pipe
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31011
Offline
How I connected mine to catch can was to REMOVE the pipe, and I used copper plumbing fittings with exhaust system sealer for set it in place. If needed later, it can be knocked out again, but will semi-permanently stay there
Open in new window

Benny tapped the hole with a M22 tap and used a screw in fitting


So the stock Datsun 1200 breather pipe is straight
Open in new window

This can be cut shorter and a rubber hose connected to a fitting. Can use the stock breather hose cut short and an AN fitting with adapter down to smaller size

many B210 & B310s have right-angle Breather Tubes
Open in new window

Posted on: 6/23 6:51
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]