User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


Sedan Rear Shocks
Home away from home
Joined:
2003/7/11 8:24
Group:
Registered Users
Posts: 490
Offline
Some time again I bought a pair of Spaxs for a RS2000 Escort rear for my SSS off a well known motorsport website in the UK and right from day 1 I wasn't happy with them as one had a totally different rebound to the other.
I did alert the seller about this but they weren't overly helpful and I won't be using them again in a hurry.
Fast forward to today and I am having issues with it giving the outer half of the rears a really hard time and I have just got the shocks back from being tested on a shock dyno and surprise, surprise they are stuffed.
What ( of decent quality) is available these days for the sedan? It is lowered as much as I can get away with so I certainly don't need anything like the travel of the standard shock.
Cheers
Dave

Posted on: 2021/10/12 1:47
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
No life (a.k.a. DattoMaster)
Joined:
2002/11/26 0:38
From Las Vegas USA
Group:
Registered Users
Posts: 2032
Offline
So I went with Koni Classics on the coupe. I had to do a bunch of comparisons; I used Rockauto's website to double check the measurements. I ended up with shines for an Alfa Spider.

Posted on: 2021/10/12 2:52
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
Home away from home
Joined:
2003/7/11 8:24
Group:
Registered Users
Posts: 490
Offline
Thanks Tom, I am pondering over using MX5 Miata Bilstein B6's - they look like they may well fit but I need to do a bit more checking. Certainly very reasonably priced from Rock Auto.
My chassis guru was talking about Nitron but they are price prohibitive and to be honest I'm not convinced a lightweight little car like the 1200 needs them.
Re the Koni Classics- is your coupe turreted in the rear or are the shocks still in the factory position?
Cheers
Dave

Posted on: 2021/10/12 3:44
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
some Spax can be rebuilt

do they look like these Spax?
Open in new window


for a lowered sedan, you can use a standard length shock, although it will only use part of the travel

KONI 80-1551 Alfa shocks can be made to fit the 1200 Coupe

Coupe shocks can be modded to fit the Sedan. The issue is the small Coupe bush hole, which can be drilled out to the 12 mm sedan size. Also transfer over the bump stops from the Sedan shock stem, as the Coupe shock doesn't have them

Posted on: 2021/10/14 10:10
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
Home away from home
Joined:
2003/7/11 8:24
Group:
Registered Users
Posts: 490
Offline
Hi DD, no the Spax's don't look the same and too be honest I wouldn't go back down that road again.
Thanks for the info on the Alfa Koni part numbers. Re the bottom eye I will be getting my engineer to transfer the spherical bearings over that we fitted to the Spax's so that shouldn't be a problem.
I think the biggest issue with the RS2000 shock is that it is simply too long for a lowered car and only using part of its range.
I would also like to limit the rear droop to around 50mm but just need to make sure that the shocks can handle that without 'topping out' and destroying themselves.
I am in communication with a English company called Protech Shocks that look promising so will be interesting to see where that leads.
Cheers
Dave

Posted on: 2021/10/14 19:42
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
Home away from home
Joined:
2003/7/11 8:24
Group:
Registered Users
Posts: 490
Offline
Hi DD, no the Spax's don't look the same and too be honest I wouldn't go back down that road again.
Thanks for the info on the Alfa Koni part numbers. Re the bottom eye I will be getting my engineer to transfer the spherical bearings over that we fitted to the Spax's so that shouldn't be a problem.
I think the biggest issue with the RS2000 shock is that it is simply too long for a lowered car and only using part of its range.
I would also like to limit the rear droop to around 50mm but just need to make sure that the shocks can handle that without 'topping out' and destroying themselves.
I am in communication with a English company called Protech Shocks that look promising so will be interesting to see where that leads.
Cheers
Dave

Posted on: 2021/10/14 19:43
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
No life (a.k.a. DattoMaster)
Joined:
2002/6/14 7:24
From Sydney
Group:
Registered Users
Posts: 2598
Offline
If you find them Dave, Tokico Prodra-G work really well. Non adjustable, however valved specifically for use in b110.

PRODRA・G・SG2203 R

Prodra-G's for reference.
Open in new window

Open in new window

Posted on: 2021/10/15 1:53

Edited by benny on 2021/10/15 2:42:46
Edited by benny on 2021/10/15 4:03:20
Edited by benny on 2021/10/15 4:11:20
_________________

-----------------------------------------
1971 B110 Sedan GX Spec
1970 KB110 Coupe Track Car
1970 KB10 Coupe
-----------------------------------------
S13 caliper b...
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
No life (a.k.a. DattoMaster)
Joined:
2002/11/26 0:38
From Las Vegas USA
Group:
Registered Users
Posts: 2032
Offline
Dave the shocks have the standard position at the top but the lower mount has been mover per the competition suspension manual. I'm using Koni part# 80-1551

Posted on: 2021/10/16 3:03
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
Home away from home
Joined:
2003/7/11 8:24
Group:
Registered Users
Posts: 490
Offline
Hi Tom,
Not having much luck with the English Company Protech so have been looking at other options.
Would you by any chance have the open and closed lengths of the Koni 801551? Also the shaft diameter and length?
Cheers
Dave

Posted on: 2021/10/21 3:48
Transfer the post to other applications Transfer


Re: Sedan Rear Shocks
No life (a.k.a. DattoMaster)
Joined:
2002/11/26 0:38
From Las Vegas USA
Group:
Registered Users
Posts: 2032
Offline
I think I've got the measurements written down somewhere. I'll try and dig them out and post them up.

Posted on: 2021/10/21 4:42
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]