Anyone know what size jets to use?

I posted the ones I used, but it only ran good, not dynoed or tested or anything.

other than that, I would start with the A12 jettings, see the 32/36 article in the tech section for the specific jets.

I saw those, I was wondering if those would be a good starting point for the A15. Overall it runs pretty good, Idle is a hit high still, i might be able to bring it down.

is that the 38dgas carb?? if so don't stagger the jets eg:185 180 it wont work let me know if you are using that carb and i'll give you my specs on my A-14

cheers

nicholas

SO did anyone find the jet sizes for an a15 with a 32/36?

i'll check and see if my carb supplier has any recommended sizes when i go out in a bit.

Well, there is no book of jet sizes per se. So I ordered the jets mentioned in the 32/36 dgav section, since they're probably a good start. I was told that there are no choke tubes ( whatever that means. I can't get them, and probably don't need em. )

Does the different sizing in 3.5 and 4.5 Choke tubes make much of a difference?

they probably matter less than the other tubes, since you don''t run on the choke much.

I have nearly all the jets now, the main jets were out of stock, so I have everything but those and the choke tube. I'll let you guys know how it goes.