Hello I have 2 1200 utes 1 is 1980 model with front disc brakes and the other is a 1975 with front and rear drums. I would just like to know if its possible to swap all the disc brakes to the 1975 drum model?

what would I need to swap, master cylinder? front shocks and stub axels.. and would i need to change the rear wheel cylinders aswell?

The diff in the 1980 model is a borg warner type and the 1975 model is a banjo..

Any help would be great. thank you

so i gather no 1 here knows about swapping brakes??

Mate, I can't answer your question - Except to say that with time & know-how anything is possible.
There are some members here that could probably help, but for the meantime I suggest you try the search bar on the LH side of your screen........ Discussion threads on brakes are very common.

The brakes will swap with no hassle, swap the whole strut assembly, with the master cylinder the later one should be a dual system this I think is better as you have a larger amount of brake fluid.
The wheel cylinders wont need to be swapped and the diffs should be the same but I cant remember the which is which
Ade