I have a T28 turbo and manifold Ally inlet (round port) manifold with 60mm throttle body to suit A series, Injectors adjustable fuel reg Subaru water air intercooler and 12v water pump
Stinger ECU and Harness to suit, elec dizzy modded for turbo + other stuff
I have no time to put it my Ute
The wiring will need some sorting out I have the full stinger manual
I want around $1500 for all of it
I don

Is the exhaust manafold round port too or Oval port ?? also has it got a J pipe or its a proper made manafold (straight to the turbo)
Interested to see pic's

exhaust will be square port

Its a 1 piece manifold made from steam pipe elbows the turbo bolts to it The round port head was on the engine, it must be off a 120y

PM sent

Pctures added more can be emailed

Hmmm very intersting.

The dizzy "modified for turbo" meaning what - has the timing map for it been changed?

Also, is there a fuel pump and surge tank I see there?

I'd would like to see more pics please, PM me if you could, I'm very interested.

A dizzy modified for turbo usually means the mechanical and vacuum advance has been disabled by locking the two shafts together.

Yeah its locked but I was going to try and use the stinger to control timing but never got aroud to doing it
All of this gear was in a running Datto 1000 I have all of the gear here still but will separate. Im going to put turbo and stinger on Ebay later

So the Stinger is tuned for a 1000 and has all the sensors and plugs to suit injectors etc? Does it run well?

We are very interested in this if you are willing to ship the lot.