|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
aaayeeee
Moisabamf
Posted on: 2007/6/28 6:05
this is the EFI i want
if i were to get this what else would i need ( injectors, etc....)
#2
Re: aaayeeee
Moisabamf
Posted on: 2007/6/28 6:12
sorry gents im only 16 and me and me pops are only used to carbies, but been thinkin about converting.
so any tips, and info on the actuall installation would be great
#3
Re: aaayeeee
TnPshow
Posted on: 2007/6/28 6:12
Quote:
aaayeeee I thought it was the Fonz for a minute there... As it says in the Auction, you will need Computer, Injectors, Fuel pump, regulator. In addition to this you may want a surge tank (in which case another fuel pump to prime this). Thats the basics of it. Edit - check out their website for some more info too. http://www.extrudabody.com/
#5
Re: aaayeeee
TnPshow
Posted on: 2007/6/28 6:19
It's not simple, but just about anyone with some backyard mechanical knowledge can get there.
Plenty of info on their site HERE I highly recommend reading up on that for starters.
#7
Re: aaayeeee
TnPshow
Posted on: 2007/6/28 6:24
From what I can tell, you will also need a twin weber or SU manifold for your engine. The auction is for the throttle bodies alone and the manifold in the pic is not included.
#8
Re: aaayeeee
Moisabamf
Posted on: 2007/6/28 6:27
you heard the man gents! i needs a duo carbie manifold!
#9
Re: aaayeeee
TnPshow
Posted on: 2007/6/28 6:33
Sorry - twin SU GX manifold is the way to go, not weber.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|