|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Niissan Forklift... datsun motor.??
moistopia
Posted on: 2008/3/4 13:59
ok i have been at my work for about 4 years now and untill a last week i decided to check the motor. (cause it smelt funny..) come to my suprise i think i looks like a small a10.. but i'm not sure.. wat u think..
this thing can smoke up so easy.. and a i swear you can rev it to 6000rpm and higher... it so much fun.. ![]() ![]() so anyone else drive a forklift at work.. or else where...???
#2
Re: Niissan Forklift... datsun motor.??
ddgonzal
Posted on: 2008/3/4 16:54
I'm guessing it's an H20 which was common with forklifts. Look on the distributor side of the block, there should be a flat pad with the engine type stamped on it.
Is not an A-series engine: * A series don't have two bolts in the center of the valve cover * A10s don't say "Nissan" Oh, and don't be doing wheelies in it ![]()
#3
Re: Niissan Forklift... datsun motor.??
ratdat_uk
Posted on: 2008/3/4 18:57
I once worked at a place that had a Komatsu forklift and that did have an A10 in it which ran on LPG (although they'd converted it back to petrol). I had to replace the timing cover once after the front pulley came loose and beat the hell out of it. I used one from an E10 Cherry.
-Ed
#4
Re: Niissan Forklift... datsun motor.??
B210sleeper
Posted on: 2008/3/4 21:01
It's probably an H, there were A15 forklift motors, and yes they're pretty much the same as the vehicle ones.
#5
Re: Niissan Forklift... datsun motor.??
Cable_Tie
Posted on: 2008/3/4 22:22
Oh Look, the exhaust manifold is asking for a high mount turbo! And the carby alread has a 'hat'.
Please report back next week on the performance gain. . .
#6
Re: Niissan Forklift... datsun motor.??
B210sleeper
Posted on: 2008/3/5 1:57
there probably is a factory turbo for the H ( 2.0 liter ) as it's an industrial engine and are still made, supposedly there was a fuel injection for the A15 petrol forklift engine, but never tried to buy it.
#7
Re: Niissan Forklift... datsun motor.??
moistopia
Posted on: 2008/3/5 12:36
yeh i had a look today at the block and it says h20.. hehe
so there you have it.. dam thought it would be a a10..
#8
Re: Niissan Forklift... datsun motor.??
dattodude
Posted on: 2008/3/5 16:44
but still, would an H20 engine go ok in a DAtto?
Interesting thoughts. As others have said, can get them turbo, can get them LPG..Hmm interesting thoughts.
#9
Re: Niissan Forklift... datsun motor.??
ddgonzal
Posted on: 2008/3/5 17:24
Sure it would go good in a Datto. The H20 was the engine in the Datsun Junior.
#10
Re: Niissan Forklift... datsun motor.??
Tyrie
Posted on: 2008/3/5 22:01
H20's are pretty torquey (used in forklifts and trucks so they should be) but they dont rev, they sound like they're going to explode at 4000rpm.
Interesting rocker cover on that one, all my dad's ones have finned alloy rocker covers. You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|