+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Sparco seats problem
DatsunSSS
Posted on: 2008/9/30 20:48
How can i install a pair of sparco seats in my 2 120y without removing the original seats support?
any ideas? And how can i do to use the back seat? is a 2 doors 120y   
#2
Re: Sparco seats problem
Tyrie
Posted on: 2008/9/30 21:57
Depending what year model 120Y you have you may have to remove the brackets closest to the tunnel and remount them the same height has the ones near the doors.
Forget carrying back seat passengers with fixed buckets haha
#3
Re: Sparco seats problem
Homer
Posted on: 2008/10/1 2:10
3mm stainless adaptor plate or weld up a square braket to suit I have bolted the 3mm stainless sheet under the seats then bolted the seat runners to it. You do need to keep the rails as it wont pass rego with out movment mine moves about 2cm but thats all it needs
#4
Re: Sparco seats problem
Tyrie
Posted on: 2008/10/1 3:19
Quote:
with a late model 120Y you actually need to remove the brackets that the rails bolt to (on the floor) or else the seat will hit the roof.
#5
Re: Sparco seats problem
DatsunSSS
Posted on: 2008/10/1 7:48
in my 1977 120y i dont have to remove the brackets , the seat fits well on top of them. but i have 6cm diference between them
#6
Re: Sparco seats problem
Tyrie
Posted on: 2008/10/1 8:30
6cm difference? as in one rail sits 6cm higher than the other?
If so, are you sure the seat isnt rediculously high for comfortable driving?
#7
Re: Sparco seats problem
DatsunSSS
Posted on: 2008/10/1 18:54
yes the rail is 6cm diferent from the other,
it gives-me a good driving position, and i think all the 120y are like mine.
#8
Re: Sparco seats problem
Tyrie
Posted on: 2008/10/1 23:53
fair enough, early 120Ys had rails the same height (my '74 does)
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
