Guys, what would i have to do to make 15" wheels fit mt UTE, do i HAV TO change the struts or? I hav a set with 195/50 tyres n and would like to use this on my UTE.

they will fit providing the offset isnt too much like a front wheel drive car

ive got 15" rims on the front now with 195's someone has welded 10mm spacers on my hubs, they fit good, front guards need to be rolled though

i had 15x6 +20 offset minilites on my ute with 120y struts, scrubbed a bit on full lock

i have the largest rims and tyres legally allowed to be fitted in qld, they are 15 x 195 x 45 with +24 ofset with this ofset it has about 2 mil betweenthe rim and the strut

in qld you can have any size rim and tyre you like, providing the o/d of the tyres do not exceed that of original equipment.

edit for clarity: "the rim diameter may be varied from the standard sizebut the overall diameter of the tyre must not vary by more than +15 or -26"
it also says nothing about rim width which leads me to beleive you can run any width as long as:
you dont use spacers,
the tyres width does not exceed 1.3 times the vehicle manufacturers widest optional tyre.
and your tyres mustnt hang out past the guards.