+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Getting it together
DattoFrog
Posted on: 2009/6/2 0:23
Hey guys, I am just getting all the bits I will need for my A12 rebuild and I have just a few questions.
1) When fitting an oval port head ex A15 do I use the A15 push rods or the A12's? 2) Are the bores A12/A15 the same? 3) Do I use A12 piston and rods or A15 with the A15 head? 4) When fitting flat top pistons will I have valve clearence issues? Your advise is appreciated as always.  
#2
Re: Getting it together
andy-roo
Posted on: 2009/6/2 2:05
i think u will need to use the a12 ones wen i ran my a15 with an a12 head i used my a12 pushrods
#3
Re: Getting it together
Posted on: 2009/6/2 3:02
bores are different sizes for the a12 to a15 piston, check the wiki
#4
Re: Getting it together
ddgonzal
Posted on: 2009/6/2 3:21
For A12, keep all bottom end stuff the same including pushrods. Just change the cylinder head.
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
