|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Is this still a Carburator Problem ?
Sumith
Posted on: 2009/12/29 3:53
Hi Guys
I could get start my datto after head gasket , initialy car started but did not stay, it was to incrtease it's rpm automastically when the accelatator cable is removed and checked the squirt of fuel by moving throttle i didn't see any fuel , so thought it was a problem with the carb ,got the carb done ,now it doesn't increase it's rpm automatically checked the squirt of fuel by moving throttle it is there seems it is very week and also it will start only if i put some petrol from top on to the carb , if not it doesn't start , I think still the carb is not ok , what do you think guys, is it the car problem Yet or any thing else ? Thanks Regards sumith
#2
Re: Is this still a Carburator Problem ?
bailz
Posted on: 2009/12/29 4:34
is the fuel pump pumpin the fuel to the carby bowl?
#3
Re: Is this still a Carburator Problem ?
ddgonzal
Posted on: 2009/12/29 4:55
Quote:
checked the squirt of fuel by moving throttle it is there seems it is very week
#4
Re: Is this still a Carburator Problem ?
Sumith
Posted on: 2009/12/29 5:28
Hi Guys,
Yes Fuel Pump is working fine it brings fuel,Float level looks over mid some times and less sometimes, so the float level also might be wrong, any way i have given it to adjust,he is also not happy with the carb, he said he will make it and give, is there a way that i can check whether i have got any leaking valve ? Thanks Regards sumith
#5
Re: Is this still a Carburator Problem ?
ddgonzal
Posted on: 2009/12/29 5:32
If the fuel level is aproximately in the middle of the sight glass, but still gives an intermittent stream, the carburetor needs a new accelerator pump.
Doesn't matter about the valve.
#6
Re: Is this still a Carburator Problem ?
sikyne
Posted on: 2009/12/29 9:02
It sounds like a manifold gasket leak, Or a hose has been left off the manifold. Have all the valve clearances been done?
It should run and idle without an accelerator pump. My guess is a lack of manifold vacuum. You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|