+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
a12 with sc12 and 32/36 idle problems
aus_86
Posted on: 2010/4/26 9:58
hey guys,
i have put a sc12 and a 32/36 webber on a a12. it starts then revs, seems like its going to settle then stall. i can rev it then it will die. was woundering if this set up will run fine without the charger active? i was told it would be fine, heard that with EFI it runs like crap. another thing is the vaccum lines, i have no idea whats what. there is 3 vaccum ports. thanks for your imput. cheers!  
#2
Re: a12 with sc12 and 32/36 idle problems
supafatto
Posted on: 2010/4/26 12:22
i had a setup like this and the vac lines were blocked!!
are u running draw through or blow through?? i could run my setup on or off but it drove like #OOPS# off as it over fuled
#3
Re: a12 with sc12 and 32/36 idle problems
aus_86
Posted on: 2010/4/26 12:48
i think its draw though, the carby is on in before the charger. i think it has something to do with the lines but have no idea where the lines go. do you have any photos?
#4
Re: a12 with sc12 and 32/36 idle problems
supafatto
Posted on: 2010/4/26 12:51
i ran stock, stock pump, line, ran no return
#5
Re: a12 with sc12 and 32/36 idle problems
aus_86
Posted on: 2010/4/26 13:09
im running a elec pump. think its rated at 5-7PSI. so there is fuel for sure. think its the acclerator pump on the side, dont know where to get the vaccum for that? there is the to lines out near the base of the carby that im not sure of
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
