can u fit a ca in a 1000??
how big can u go with a turbo??
cc to kg
maybe ca16det??
thanks tommo

check out datzons thread he's got one but its not turbo charged i think, i reckon best off goin with the g13b swift motor turbo chraged that gavs running

u can make it fit tommo

Yeah it fits, I remember a guy racing a NA one around Bathurst and I think its legal in nsw. A 4agze was only just too big by about 20cc so a ca16det would be boarderline. ET15 would be cool if you could put a box behind it. Im happy with my g13b but its been a long road.

In NSW it kg x 2.5 = cc for turbo and kg x 3 = cc for NA

Here you go

lagwagon dummyfitted a ca18 into his 1k- id put it in a 1200, and put the a15 into the 1k

ca16det or 2ltr na

I had a look at 4agze on wikipedia wiki 4agze
It says Displacement 1.6 L (1587 cc)

so 634.8Kg is the lightest car it can go in?
If so a STD B10 is not legal @ 625Kg
But it you go by the Deluxe model B10 @ 645Kg then it looks legal
Am I missing something?

These weights are in an original owners manual I purchased from ebay,
VB10 is heavier again 645Kg STD and 665 Kg Deluxe.
I hope this helps.

I posted this up before. I guess its up to the way the engineer inturperets the guidelines. The way I read, it can't be done in NSW. Plus $hit is getting harder to pass by the day down here.

Page 3 in the notes, second point. Under the matrix.
guidelines for light vehicle modifications

vb10 deluxe = 1662cc turbo/ 1995cc na for 665kg
645kg 1612cc turbo/ 1935cc na
but sedan weight is 625kg
kg x 2.5 turbo/ kg x 3 na